NVIDIA GeForce MX130 vs AMD Radeon RX Vega 3 vs NVIDIA GeForce MX150

NVIDIA GeForce MX130

The Nvidia GeForce MX130 is a mid-range laptop graphics card with DirectX 12 support (FL 11_0) based on the older Maxwell architecture. It is a renamed GeForce 940MX and was announced in late 2017. It can be equipped with fast GDDR5 or slower DDR3 graphics memory.

The performance should be identical to the corresponding 940MX version (see our extensive benchmarks) and therefore positioned below the GeForce MX150. Demanding games like Ark Survival Evolved or PUBG may not run fluently even in the lowest detail settings. Less demanding games like Fifa 18 (with a powerful CPU) or Overwatch are also playable in medium settings.

The TDP of the card should be rated at about 15 to 30 Watt (depending on the version, clock speeds and memory). Therefore, the GPU is best suited for laptops from 13-inch and up.

AMD Radeon RX Vega 3

The AMD Radeon RX Vega 3 is an integrated GPU for laptops. It is used for the entry level Ryzen 3 APUs, which were launched in early 2018. The GPU is based on the Vega architecture (5th generation GCN) and has 3 CUs (= 192 of the 704 shaders) clocked at up to 1200 MHz (depending on the model). The performance depends on the configured TDP (12-25 W at launch), the clocks, the cooling, and the memory configuration). The GPU should benefit from fast dual-channel DDR4-2400 RAM (contrary to DDR4-2133 single-channel, which is also possible).

The Vega architecture offers some improvements over the Polaris generation and now supports DirectX 12 Feature Level 12_1. More information is available in our dedicated article about the Raven Ridge architecture.

Currently we estimate a performance around a GeForce 910M. Therefore, demanding current games may not be playable fluently.

Thanks to the 14nm process and clever power-saving features, the power consumption is comparatively low (according to AMD), so the graphics card can also be used for slim and light notebooks.

NVIDIA GeForce MX150

The Nvidia GeForce MX150 is a dedicated entry-level mobile graphics card for laptops based on the GP108 chip with the Pascal architecture. It was announced mid 2017 and is the mobile version of the desktop GeForce GT 1030. It offers the same 384 shader cores and 64 Bit memory bus manufactured in 14 nm. The clock rates and performance however are a bit higher than the desktop GT 1030. Officially it is the successor to the older Maxwell based GeForce 940MX.

Currently there are two variants of the MX150, a "normal" N17S-G1-A1 with 1468 - 1531 MHz and 25 Watt TDP and a power efficient variant named N17S-LG-A1 with 936 - 1037 MHz (-32%) and 10 Watt TDP (-60%) for thin and light laptops.

The GP108 chip is manufactured in a 14 nm FinFET process at Samsung (LPP) and offers a number of new features, including support for DisplayPort 1.4 (ready), HDMI 2.0b, HDR and improved H.265 video de- and encoding (PlayReady 3.0). 4K HDR with Netflix however wont run due to the minimum 3 GB graphics memory that is required. Compared to the bigger Pascal chips, the small GP108 does not support Simultaneous Multi-Projection (SMP) for VR and G-Sync. A full list of improvements and the new Pascal desktop GPUs is available in our dedicated Pascal architecture article.

The performance however is higher than the old GeForce GTX 950M with GDDR5 memory. Still modern and demanding games only run in low settings and resolutions fluently. E.g. Assassin's Creed Origins was only playable in lowest settings and 1280x720 pixels. Less demanding games like Call of Duty WW2 also ran in medium settings and Full HD fluently. See below for more and detailed gaming benchmarks.

The power efficient N17S-LG-A1 ULV variant is clearly slower than the normal one (due to the 32% lower boost clock).

The power consumption (25 Watt TDP of the chip alone) however lies on a level of the old 940MX (23 Watt). The older 950M and the new GTX 1050 are rated much higher with 40 Watt TDP. The GeForce MX150 also uses a small 23 x 23 mm package due to the small chip size.