NVIDIA GeForce RTX 2060 Mobile vs NVIDIA GeForce RTX 3050 4GB Laptop GPU vs NVIDIA GeForce RTX 3050

The NVIDIA GeForce RTX 2060 for laptops is a fast mid-range gaming graphics card for laptops. It is based on the desktop RTX 2060 chip but at reduced GPU clock rates (-30%) and reduces power consumption (80 - 90 Watt TGP versus 160 Watt for the desktop version).

In 2020 Nvidia also released a refreshed version with the same name. It is based on the TU106B chip and offers new voltage regulators and controllers. Furthermore, the maximum TGP was increased to 115 Watt and therefore the GPU can clock higher (1005 - 1560 MHz). The memory speed however was decreased to 11 Gbps leading to a slightly better overall performance compared to the old version.

NVIDIA manufacturers the Turing TU106 chip on a 12 nm FinFET process and includes features like Deep Learning Super Sampling (DLSS) and Real-Time Ray Tracing (RTRT), which should combine to create more realistic lighting effects than older GPUs based on the company's Pascal architecture (if the games supports it). The RTX 2060 is also DisplayPort 1.4 ready, while there is also support for HDMI 2.0b, HDR, Simultaneous Multi-Projection (SMP) and H.265 video en/decoding (PlayReady 3.0).

The gaming performance of the mobile RTX 2060 is similar to an old Nvidia GeForce GTX 1070 (Desktop) and clearly behind the desktop RTX 2060. The mobile GTX 1660 Ti is only a few percent behind in our gaming benhcmarks, but offers no raytracing features built in the GPU. For demanding games of 2019, the RTX 2060 is most suited for full HD (1080p) and high / ultra settings. However, there is not much headroom to activate the taxing raytracing features in most games.

The power consumption is rated at 80 - 90 Watt TGP by Nvidia and therefore similar to the Max-Q variants of the RTX 2070 and RTX 2080. In our real world laptop-tests the power draw of the whole systems running The Witcher 3 shows that the RTX 2060 slots in slightly below the Max-Q Variants and slightly above the GTX 1660 Ti mobile (as expected).

The Nvidia GeForce RTX 3050 Laptop GPU (mobile, NVIDIA_DEV.2583, GN20-P0) is the slowest RTX 3000 mobile card and based on the GA107 Ampere chip. It offers 2048 CUDA, 16 Ray Tracing and 64 Tensor cores. The memory bus is limited to 128 Bit and supports 4 GB of GDDR6 dedicated graphics memory.The clock speed depends on the TGP variant and can range from 713 - 1530 (base) and 1058 - 1740 (boost) for the TGP variants of 35 to 80 Watt (see table below).

In early 2023 Nvidia did refresh the RTX 3050 (GN20-P0-R) with a bigger VRAM of 6GB but reduced memory bandwidth. The 3050 6GB Laptop GPU also offers 2,560 CUDA cores as the 3050 Ti mobile.

The performance should be between the old GTX 1650 Ti and the 1660 Ti Max-Q depending on the used TGP variant. Therefore, it is best suited for full HD gaming (1920 x 1080) with high detail settings in demanding games. The performance is not sufficient to enable Raytracing in most games, but the Tensor cores can be used for DLSS in some games (and get performance boost with slight quality reduction). Beware, that the low TGP variants will offer a significantly lower performance.

The faster RTX 3050 Ti offers 25% more cores at similar clock speeds and TGP settings. 

The GA107 chip offers 3,072 FP32 ALUs of which half can also execute INT32 instructions (i.e. 1,536 INT32 ALUs). The RTX 3050 however maybe won't use all ALUs on the chip. With Turing all shaders could still execute FP32 or INT32 instructions. The raytracing and tensor cores on the chip were also improved according to Nvidia. The Ampere chips also include an improved 5th generation video encoder (NVENC for H.264 and H.265) and a 7th generation decoder (for various formats now including AV1).

The GA107 chip is manufactured by Samsung in 8nm (8N), which is not quite able to keep up with the 7nm node at TSMC (e.g. used by AMD and also for the professional GA100 Ampere chip).