NVIDIA GeForce MX130 vs NVIDIA GeForce 920M vs NVIDIA GeForce 940M

NVIDIA GeForce MX130

The Nvidia GeForce MX130 is a mid-range laptop graphics card with DirectX 12 support (FL 11_0) based on the older Maxwell architecture. It is a renamed GeForce 940MX and was announced in late 2017. It can be equipped with fast GDDR5 or slower DDR3 graphics memory.

The performance should be identical to the corresponding 940MX version (see our extensive benchmarks) and therefore positioned below the GeForce MX150. Demanding games like Ark Survival Evolved or PUBG may not run fluently even in the lowest detail settings. Less demanding games like Fifa 18 (with a powerful CPU) or Overwatch are also playable in medium settings.

The TDP of the card should be rated at about 15 to 30 Watt (depending on the version, clock speeds and memory). Therefore, the GPU is best suited for laptops from 13-inch and up.

NVIDIA GeForce 920M

The NVIDIA GeForce 920M (sometimes also NVIDIA GeForce GT 920M) is an entry level DirectX 12 graphics card. It is based on the 28 nm Kepler architecture and uses the same GK208 chip as the GeForce GT 730M, 825M and 740M. The 384 shaders are clocked at 954 MHz, while the memory (64-bit DDR3 interface) runs at 900 MHz (1800 MHz effective).

Architecture

GK208 is based on the Kepler architecture and offers two shader blocks, called SMX, each with 192 shaders for a total of 384 shader cores. The shaders are clocked at the same speed as the rest of the chip. Furthermore, the GK208 chip has 16 TMUs and 8 ROPs on a 64-bit memory interface.

PCIe 3.0 is now supported by the mobile Kepler series and GPU Boost 2.0 mode can automatically overclock the card if the laptop cooling system allows it. This feature is available on any notebook with a graphics card from the 800M series.

Performance

The GeForce 920M offers a performance similar to the AMD Radeon R7 M260 or R7 M360 and will handle modern games (as of 2014/2015) in low settings only. For comparison, a GeForce 930M is about 20 to 30 percent faster than the 920M.

Features

The feature set of the 920M corresponds to the GT 730M and 825M. This includes support for up to 4 active displays. Furthermore, high resolution monitors of up to 3840x2160 pixels can now be connected using DisplayPort 1.2 or HDMI 1.4a if available. HD-Audio codecs, such as Dolby TrueHD and DTS-HD, can be transmitted via bitstream mode through the HDMI port. However, as most laptops will feature Optimus, the integrated GPU will likely have direct control over the display ports and may limit the feature set available by the Nvidia Kepler cards.

The 5th generation PureVideo HD video processor (VP5) offers hardware decoding of HD videos. Common codecs such as MPEG-1/2, MPEG-4 ASP, H.264 and VC1/WMV9 are fully supported up to 4K resolutions while VC1 and MPEG-4 are supported up to 1080p. Two streams can be decoded in parallel for features such as Picture-in-Picture. Another feature is the inclusion of a dedicated video encoding engine similar to Intel QuickSync that can be accessed via the NVENCI API.

Power Consumption

The power consumption of the GeForce 920M is similar to the 825M and suited for 13-inch laptops and above.

NVIDIA GeForce 940M

The NVIDIA GeForce 940M is a mid-range DirectX 11-compatible graphics card for laptops unveiled in March 2015. It is based on Nvidia's Maxwell architecture (GM108 chip) and manufactured in 28 nm. The 940M offers 384 shader units as well as 2 GB of DDR3 memory (64 bit, 2000 MHz effective).

Compared to the previous and technically very similar GeForce 840M, the GeForce 940M is clocked just slightly higher.

Architecture

Compared to Kepler, Maxwell has been optimized in several details to increase power efficiency. Smaller Streaming Multiprocessors (SMM) with only 128 ALUs (Kepler: 192) and an optimized scheduler should lead to better utilization of the shaders. Nvidia promises that a Maxwell SMM with 128 ALUs can offer 90 percent of the performance of a Kepler SMX with 192 ALUs. GM108 features 3 SMMs and thus 384 shader cores, 24 TMUs and 8 ROPs (64-bit interface).

Another optimization is the massively enlarged L2 cache. The larger size can process some of the memory traffic to allow for a relatively narrow memory interface without significantly reducing performance.

Similar to Fermi and Kepler, the GM107/GM108 support DirectX 12 with feature level 11_0 only.

Performance

Due to its just 5 percent higher core clock, the GeForce 940M is only marginally faster than the previous GeForce 840M and similar to the older GeForce GT 750M (DDR3 version). Many games of 2014/2015 can be played fluently in WXGA resolution (1366 x 768) and medium detail settings. However, very demanding games such as Assassin's Creed Unity will require lower resolutions and/or details.

Features

GM108 integrates the sixth generation of the PureVideo HD video engine (VP6), offering a better decoding performance for H.264 and MPEG-2 videos. Of course, VP6 supports all features of previous generations (4K support, PIP, video encoding via NVENC API). Unfortunately, HDMI 2.0 is still not supported.

Power Consumption

The power consumption of the GeForce 940M should be about 30 Watts or lower. Therefore, the GPU is best suited for laptops 13 - 14 inches in size and above. The 900M series also supports Optimus to automatically switch between an integrated graphics card and the Nvidia GPU.