AMD Radeon RX Vega 6 (Ryzen 4000/5000) vs NVIDIA GeForce 940M

AMD Radeon RX Vega 6 (Ryzen 4000/5000)

The AMD Radeon RX Vega 6 is an integrated GPU for notebooks. It is used in certain Ryzen 5 APUs of the Renoir generation (Ryzen 4000 Mobile), which were launched in early 2020. The iGPU is based on the Vega architecture (5th generation GCN) and has 6 CUs (= 384 of the 512 shaders) clocked at up to 1,500 MHz. Compared to the similar Radeon RX Vega 6 in the Raven Ridge generation (Ryzen 2000 Mobile), the GPU is clocked significantly higher (1.500 versus 1.100 MHz Boost).

The performance depends on the configured TDP (12-54 W at launch), the clocks, the cooling, and the memory configuration). The GPU should benefit from fast dual-channel DDR4-3200 RAM (contrary to DDR4-2133 single-channel, which is also possible).

The Vega architecture offers some improvements over the Polaris generation and now supports DirectX 12 Feature Level 12_1. More information is available in our dedicated article about the Raven Ridge architecture.

The performance is clearly faster than the old RX Vega 6 thanks to the higher clock speed and faster main memory (if used). In first synthetic benchmarks, the Vega 6 was able to reach the performance of a dedicated GeForce MX150. In games it should be somewhere between a GeForce MX230 and MX150.

Thanks to the modern 7nm process and clever power-saving features, the power consumption is comparatively low (according to AMD), so the graphics adapter can also be used for slim and light notebooks.

NVIDIA GeForce 940M

The NVIDIA GeForce 940M is a mid-range DirectX 11-compatible graphics card for laptops unveiled in March 2015. It is based on Nvidia's Maxwell architecture (GM108 chip) and manufactured in 28 nm. The 940M offers 384 shader units as well as 2 GB of DDR3 memory (64 bit, 2000 MHz effective).

Compared to the previous and technically very similar GeForce 840M, the GeForce 940M is clocked just slightly higher.

Architecture

Compared to Kepler, Maxwell has been optimized in several details to increase power efficiency. Smaller Streaming Multiprocessors (SMM) with only 128 ALUs (Kepler: 192) and an optimized scheduler should lead to better utilization of the shaders. Nvidia promises that a Maxwell SMM with 128 ALUs can offer 90 percent of the performance of a Kepler SMX with 192 ALUs. GM108 features 3 SMMs and thus 384 shader cores, 24 TMUs and 8 ROPs (64-bit interface).

Another optimization is the massively enlarged L2 cache. The larger size can process some of the memory traffic to allow for a relatively narrow memory interface without significantly reducing performance.

Similar to Fermi and Kepler, the GM107/GM108 support DirectX 12 with feature level 11_0 only.

Performance

Due to its just 5 percent higher core clock, the GeForce 940M is only marginally faster than the previous GeForce 840M and similar to the older GeForce GT 750M (DDR3 version). Many games of 2014/2015 can be played fluently in WXGA resolution (1366 x 768) and medium detail settings. However, very demanding games such as Assassin's Creed Unity will require lower resolutions and/or details.

Features

GM108 integrates the sixth generation of the PureVideo HD video engine (VP6), offering a better decoding performance for H.264 and MPEG-2 videos. Of course, VP6 supports all features of previous generations (4K support, PIP, video encoding via NVENC API). Unfortunately, HDMI 2.0 is still not supported.

Power Consumption

The power consumption of the GeForce 940M should be about 30 Watts or lower. Therefore, the GPU is best suited for laptops 13 - 14 inches in size and above. The 900M series also supports Optimus to automatically switch between an integrated graphics card and the Nvidia GPU.