NVIDIA GeForce GTX 980M vs NVIDIA GeForce GTX 1070 Mobile vs NVIDIA GeForce GTX 970M SLI

NVIDIA GeForce GTX 980M

NVIDIA GeForce GTX 1070 Mobile

The Nvidia GeForce GTX 1070 is the second fastest Pascal based graphics card in mid May 2016. It comes in two variants, the desktop version (see here for the detail page) with 1920 shaders and the mobile variant with 2048 shaders and lower clock rates. Both cards are based on a cut down GP104 chip (like the GTX 1080) and are manufactured in 16 nm FinFET at TSMC.

Compared to the GTX1080, the GTX1070 features less CUDA cores (2048 versus 2560) that are clocked a bit lower (maximum Boost 1645 versus 1733). Instead of the new GDDR5X, the GTX 1070 uses slower GDDR5 graphics memory - but still 8 GB. The TDP is also reduced and rumored to be 10 Watts higher than the predecessor, the GTX 980M.

For thin and light laptops Nvidia offer a Max-Q called version of the GTX 1070 with lower TDP and also significantly lower performance. Sadly this variant im sold with the same GTX 1070 name, making it hard to judge the performance.

The performance depends on the cooling solution of the laptop. With a good fan system, the performance of the laptop version is on par with the desktop GTX 1070 (Founders Edition). Nvidia claims that partner solutions can be up to 10 percent slower however. In our benchmarks with various laptops the performance ranged from -5 to -14% slower performance compared to partner models of the GTX 1080 desktop models with slightly higher clocks.

On average the GTX 1070 is around 20 percent faster than the old mobile GeForce GTX 980 and therefore the second fastest mobile graphics card (non SLI). Therefore it is capable of WQHD and 4K gaming in high settings (see game benchmarks below).

The GP104 chip is manufactured in 16nm FinFET process at TSMC and offers a range of new features. DisplayPort 1.4 (ready), HDMI 2.0b, HDR, Simultaneous Multi-Projection (SMP), improved H.265 video en- and decoders (for PlayReady 3.0) are only some of the improvements. See our detailed Pascal architecture article for more details.

The power consumption of the GTX 1070 is specified with 115 Watt TGP according to Nvidia and therefore slightly above the old GeForce GTX 980M. This leads to rather big and clunky gaming laptops that use the GTX 1070. The later released Max-Q version of the GTX 1070 uses only 80 - 90 Watt TGP and is therefore better suited for thin and light laptops.

NVIDIA GeForce GTX 970M SLI

The NVIDIA GeForce GTX 970M SLI is a high-end DirectX 11-compatible graphics solution for laptops, consisting of two GeForce GTX 970M. Each card has a 28 nm GM204 GPU based on the Maxwell architecture, which is the same chip as found on the GTX 980M as well as several desktop cards. The clocks for the SLI-setup are usually identical to a single GTX 970M (924 MHz GPU, 1250 MHz memory).

With SLI, each card renders a single frame (AFR mode). Therefore, it may suffer from micro stuttering in low fps ranges of 30 fps. This happens because of different timespans between two frames (e.g., irregular delays between sequential frames).

Architecture

GM204 is based on Nvidia's Maxwell architecture, which replaces the previous Kepler generation. Among other changes, Nvidia have restructured the streaming multi processors (SMM) in order to increase workload and efficiency. Now each SMM contains only 128 shader units and 8 TMUs, which is noticeably less than an equivalent Kepler GPU. The GM204 features four GPCs, and each consists of four SMMs. But, in the GeForce GTX 970M, Nvidia have deactivated 6 of 16 SMMs. As a result, only 1280 shader ALUs and 80 TMUs are active. In addition, there are 48 ROPs in three clusters with 16 units each.

The memory interface has a bandwidth of 192-bits (3x 64 bit) for each of the two GPUs. Thanks to an improved compression algorithm, the connection to the GDDR5 memory should be significantly more efficient per MHz. Furthermore, the L1 (96 KB per SMM) and L2 caches (2 MB) have been significantly increased to lower the needed bandwidth. Compared to the mid-range GM107, the newer and larger GM204 has several additional features and changes. Aside from the improved polymorphic engine in the SSMs, it is also the first Nvidia chip to support DirectX 12 Feature Level 12_1.

Performance

With good driver support, SLI almost doubles the performance of a single card. The GTX 970M SLI outperforms the former GeForce GTX 880M SLI by about 10 percent and is the second fastest mobile graphics solution in late 2014. Only the significantly more expensive GTX 980M SLI offers even more 3D power and is about 30 percent faster. Nevertheless, the GTX 970M SLI is powerful enough to run even the most demanding games with highest details, AA/AF and resolutions exceeding FullHD.

Features

Most of the features are identical to the GeForce GTX 800M series. With the GTX 970M, there can be up to 4 active displays possible, but this will likely decrease due to Optimus. Displays can be connected with a maximum resolution of 3840 x 2160 pixels via DisplayPort 1.2 or HDMI 2.0 (no HDCP @ 4K). HD audio formats like Dolby True HD and DTS HD can be sent to a compatible receiver as bitstream. As with previous models, 3D Vision is not supported with Optimus.

The updated video processor VP6 supports the usual formats like H.264 and can also decode and encode H.265 with a resolution of up to 4K via the NVENC API. Several parallel streams, such as picture-in-picture in a Blu-Ray movie, are also possible.

Further features of the GTX 900M series, which are also partly supported by older cards, include Battery Boost (longer battery life during gaming), Shadowplay (recording of gaming videos up to 4K60p and 130 Mbit/s) and Gamestream (game streaming on Shield console). More information on these features are available here.

Power Consumption

The power consumption of each GeForce GTX 970M including its MXM board and memory should be similar to a GTX 870M with a specified TDP of 100 W, leading to a total TDP of about 200 W. Given the significantly higher performance, this can be considered a massive increase in performance-per-watt. Nevertheless, the SLI setup can only be used in very large and heavy gaming notebooks with powerful cooling systems. Under low load, dynamic clock rates help the GPUs to save energy.