NVIDIA GeForce RTX 3070 Ti Laptop GPU vs NVIDIA GeForce RTX 2060 Max-Q

The Nvidia GeForce RTX 3070 Ti Laptop GPU (mobile, GN20-E6, Max-P, Max-Q) is a mobile graphics card for notebooks and the refresh of the RTX 3070. It was announced early 2021 at CES and is based on the same GA104 Ampere chip as the old RTX 3070 Laptop. Compared to the old card, the newer one offers 15% more shaders but less clock speed. It will still feature the 256 Bit memory bus and 8 GB GDDR6. The RTX 3070ti is available in different power variants ranging from 80 Watt TGP with a Boost clock of 1035 MHz up to 125 Watt models with a Boost clock of 1485 MHz. However, there are even some models with a maximum TGP of 150 Watt (e.g., Acer Nitro 5).

There is no more Max-Q variant (formerly used for the low power variants) but every OEM can choose to implement Max-Q technologies (Dynamic Boost, Whispermode).

The performance depends on the TGP setting and cooling of the laptop. On average it should be somewhere between the old RTX 3070 Mobile and RTX 3080 Mobile (at similar TDP settings). Therefore, the card is best suited for QHD gaming in max details (for demanding games like Cyberpunk 2077). Less demanding games like the Farming Simulator 22 or older games should also run in 4K with max. detail settings.

The GA104 chip offers 6,144 FP32 ALUs of which half can also execute INT32 instructions (i.e. 3,072 INT32 ALUs). The RTX 3070 Ti however won't use all ALUs on the chip. With Turing all shaders could still execute FP32 or INT32 instructions. The raytracing and tensor cores on the chip were also improved according to Nvidia. The RTX 3070 Ti mobile series uses 5,888 of the 6,144 cores. The Ampere chips also include an improved 5th generation video encoder (NVENC for H.264 and H.265) and a 7th generation decoder (for various formats now including AV1).

The GA104 chip is manufactured by Samsung in 8nm (8N), which is not quite able to keep up with the 7nm node at TSMC (e.g. used by AMD and also for the professional GA100 Ampere chip).

The NVIDIA GeForce RTX 2060 with Max-Q design is the power saving variant of the mobile GeForce RTX 2060. Therefore it is a high end gaming graphics card for thin laptops. It is based on the same chip as the RTX 2060 but with reduced clock speeds and a lower power consumption. It was released in 2020 with the Zephyrus G14 gaming laptop.

With the refresh, Nvidia also reworked the Max-Q technologies for more efficiency. Low Voltage GDDR6 (lower clocked but more headroom for the GPU) and improved regulator efficiency should improve the performance per Watt. Two new optional features can also be implemented by the OEM. Max-Q Dynamic Boost is able to shift power from the CPU to the GPU on a per frame basis to increase overall performance. Furthermore, the laptop manufacturer can also implement Advanced Optimus with a dynamic display switch (hardware) to enable Optimus, G-SYNC and high refresh rate displays (up to 4K 120 Hz).

The clock is not the only difference compared to the regular GTX 2060 though. The drivers for the Max-Q version were optimized for efficiency (and not performance; only for Max-Q models), there are optimized voltage converters for 1V operation, high-end cooling methods, and a 40 dB limit for the fan noise (with clock adjustments to ensure this at all times).

The performance should be only slightly below the normal RTX 2060 due to the decreased clock rates. It should be most suited for 1080p gaming at maximum detail level. Raytracing features however may reduce framerates a lot, so using raytracing will be limited to some games.

The chip is specified at a TGP of around 65 Watt and therefore clearly lower than the 80 - 90 Watt of the regular RTX 2060 Mobile.