NVIDIA GeForce GTX 980 SLI (Laptop) vs NVIDIA GeForce RTX 3080 12 GB vs NVIDIA GeForce RTX 3070

NVIDIA GeForce GTX 980 SLI (Laptop)

The Nvidia GeForce GTX 980 SLI is a high-end DirectX 12-compatible graphics solution for laptops, consisting of two GeForce GTX 980 cards. Each card has a 28 nm GM204 GPU based on the Maxwell architecture with similar specifications as the desktop GeForce GTX 980. The clocks for the SLI-setup are usually identical to a single GTX 980.

With SLI, each card renders a single frame (AFR mode). Therefore, it may suffer from micro-stuttering in low fps ranges of 30 fps. This happens because of different time-spans between two frames (e.g., irregular delays between sequential frames).

The performance is on a level with the two desktop GTX 980 cards in SLI. Due to the different cooling solutions, the long-term performance may be slightly lower compared to a well cooled desktop, but Nvidia assures there will only be small degrades in performance. As with all SLI combinations, the performance depends on the driver support for the used benchmark and game. In our tests with an MSI GT80S, the 980 SLI was the fastest graphics solution for laptops. The 980M SLI was 17% slower, a single 980 26% slower. Therefore, the 980 SLI for laptops offers enough performance for all demanding games from 2015 in high details and 4K resolution.

The core features are also the same as the desktop 980, so expect support for DirectX 12 (FL 12_1). There will be no support for the new H.265 video engine as found on the desktop GTX 950.

The power consumption of a single card is a lot higher than other mobile graphics cards like the GeForce GTX 980M (100 Watt TDP). According to Nvidia, the TDP of the reference design is still 165 Watt like in the desktop version. So, the TDP of the SLI combination may be as high as 330 Watt. Therefore, only big laptops with efficient cooling methods can house the GeForce GTX980 for laptops.

NVIDIA GeForce RTX 3080 12 GB

The Nvidia GeForce RTX 3080 12GB is high-end desktop graphics card based on the Ampere generation. It uses the big GA102 chip and offers 8,704 shaders and 12 GB GDDR6X graphics memory. Compared to the older 10 GB model, the 12 GB model offers more bandwidth and therefore a higher TDP.

The gaming performance in 4k is clearly better than the old GeForce RTX 2080 Ti (approximately 15% faster). Therefore, even demanding games should run with maximum detail settings in 4k. Enabling raytracing will however reduce the framerate and therefore maximum details won't be playable. 

The RTX3080 is produced in 8nm at Samsung and rated at 350 Watt.

NVIDIA GeForce RTX 3070

The Nvidia GeForce RTX 3070 is a fast desktop graphics card based on the Ampere architecture. It uses the big GA104 chip and offers 5,888 cores and 8 GB GDDR6 graphics memory. 

The performance in games and 4k resolution is slightly below a RTX 2080 Ti but clearly faster then the old RTX 2080 Super. For most games, the performance is sufficient for 4k and maximum details. Enabling raytracing however (without DLSS) will lead to a significant lower performance (although the RTX performance was clearly improved compared to the RTX 2000 series).

The GA104 chip is produced in 8nm at Samsung and the power consumption of the RT 3070 is specified with 220 Watt (RTX 2070 Super - 215 Watt).