Intel Iris Pro Graphics 5200 vs NVIDIA GeForce GTX 1070 Max-Q vs NVIDIA GeForce GTX 1080 SLI (Laptop)

Intel Iris Pro Graphics 5200

The Intel Iris Pro Graphics 5200 (GT3 + eDRAM), also called the HD Graphics 5200, is a processor graphics card that is included in some of the Haswell processors of 2013 (e.g. Core i7-4750HQ). It represents the highest configuration of the integrated graphics unit (40 execution units) and also has an additional eDRAM cache (128 MB on-package, 77 mm², 102 GB/s). The base clock can be automatically overclocked using Turbo Boost technology. Depending on the processor model, the base and turbo clock rates may differ (usually up to 1200 - 1300 MHz), resulting in varying graphics performance between CPU models.

In comparison to the HD 4000, the graphics core has been modified extensively. The Iris Pro supports DirectX 11.1, OpenCL 1.2 and OpenGL 4.0. It also features an improved decoder for 4K videos and the fast Quick Sync encoder.

Thanks to the fast eDRAM memory, the average performance of the Iris Pro is only about 15 percent behind the dedicated mid-range cards GeForce GT 650M and GT 750M (DDR3 versions). This makes the Iris Pro even faster than AMDs Radeon HD 8650G and the fastest integrated GPU of 2013. Therefore, many current games can be played fluently in medium or high detail settings and a resolution of 1366 x 768 pixels. In some older or less demanding titels like Diablo III or Fifa 2013, even higher resolutions or quality settings may be possible.

Due to the 22nm 3D Tri-Gate production process, power consumption should be relatively low. The Iris Pro can be found on certain quad-core Haswell CPUs in the 47 Watt TDP range.

NVIDIA GeForce GTX 1070 Max-Q

The Nvidia GeForce GTX 1070 with the Max-Q design is a mobile high-end GPU from the Pascal series. It is designed for thin and light laptops and about 10-15% slower than a regular GTX 1070 for laptops based on the cooling capabilities. The base frequency (1101-1215 MHz) is also much lower than on the regular GTX 1070 (1433 MHz, at least -10%) and the Boost (1265-1379 MHz) is also much lower compared to 1645 MHz (at least -6%) for the regular GTX 1070. The memory clock, however, is identical.

The clock is not the only difference compared to the regular GTX 1070 though. The drivers for the Max-Q version were optimized for efficiency (and not performance; only for Max-Q models), there are optimized voltage converters for 1V operation, high-end cooling methods, and a 40 dB limit for the fan noise (with clock adjustments to ensure this at all times).

Features

The GP104 chip is manufactured in 16nm FinFET process at TSMC and offers a range of new features. DisplayPort 1.4 (ready), HDMI 2.0b, HDR, Simultaneous Multi-Projection (SMP), improved H.265 video en- and decoders (for PlayReady 3.0) are only some of the improvements. See our detailed Pascal architecture article for more details.

The power consumption of the Max-Q design is notably lower than the normal GTX 1070 for laptops and ranges between 80 and 90 Watt (TGP) according to Nvidia.

NVIDIA GeForce GTX 1080 SLI (Laptop)

The Nvidia GeForce GTX 1080 SLI for laptops is a combination of two GTX 1080 graphics cards in SLI mode. Each card renders one frame at a time (AFR mode) but depends for most games on a good profile in the driver. Therefore, the performance can range from no gains over a single GTX 1080 to up to 90% faster performance. Sometimes, the combination may also suffer from micro-stuttering. The technical details of the card are identical to a single GTX 1080 (see for more information) and the power consumption is doubled. Therefore, the 1080 SLI combination is only found in huge clunky laptops.