The Nvidia GeForce RTX 3060 Max-Q (for laptops, GN20-E3, Max-Q) is the former name for a RTX 3060 Laptop GPU with Max-Q technologies. In previous generations, the Max-Q name was used for low power versions. With the RTX 3000 series, every TGP-version can now use Max-Q technologies and all GPUs are called RTX 3060 Laptop GPU (60 - 115W).
The Nvidia GeForce RTX 3050 Laptop GPU (mobile, NVIDIA_DEV.2583, GN20-P0) is the slowest RTX 3000 mobile card and based on the GA107 Ampere chip. It offers 2048 CUDA, 16 Ray Tracing and 64 Tensor cores. The memory bus is limited to 128 Bit and supports 4 GB of GDDR6 dedicated graphics memory.The clock speed depends on the TGP variant and can range from 713 - 1530 (base) and 1058 - 1740 (boost) for the TGP variants of 35 to 80 Watt (see table below).
Preliminary clock rates
TGP (Power Consumption)
Base Clock Speed (MHz)
Boost Clock Speed (MHz)
The performance should be between the old GTX 1650 Ti and the 1660 Ti Max-Q depending on the used TGP variant. Therefore, it is best suited for full HD gaming (1920 x 1080) with high detail settings in demanding games. The performance is not sufficient to enable Raytracing in most games, but the Tensor cores can be used for DLSS in some games (and get performance boost with slight quality reduction). Beware, that the low TGP variants will offer a significantly lower performance.
The faster RTX 3050 Ti offers 25% more cores at similar clock speeds and TGP settings.
The GA107 chip offers 3,072 FP32 ALUs of which half can also execute INT32 instructions (i.e. 1,536 INT32 ALUs). The RTX 3050 however maybe won't use all ALUs on the chip. With Turing all shaders could still execute FP32 or INT32 instructions. The raytracing and tensor cores on the chip were also improved according to Nvidia. The Ampere chips also include an improved 5th generation video encoder (NVENC for H.264 and H.265) and a 7th generation decoder (for various formats now including AV1).
The GA107 chip is manufactured by Samsung in 8nm (8N), which is not quite able to keep up with the 7nm node at TSMC (e.g. used by AMD and also for the professional GA100 Ampere chip).
The Nvidia GeForce RTX 3060 Ti is a fast desktop graphics card based on the Ampere architecture. It uses the big GA104 chip and offers 4,864 cores and 8 GB GDDR6 graphics memory.
The performance in games and 4k resolution is slightly above a desktop RTX 2080 Super. For many games, the performance is sufficient for 4k and maximum details. Enabling raytracing however (without DLSS) will lead to a significant lower performance (although the RTX performance was clearly improved compared to the RTX 2000 series).
The GA104 chip is produced in 8nm at Samsung and the power consumption of the RTX 3060 Ti is specified with 200 Watt (RTX 2070 Super - 215 Watt).
Average Benchmarks NVIDIA GeForce RTX 3050 Laptop GPU → NAN%n=
Average Benchmarks NVIDIA GeForce RTX 3060 Ti → NAN%n=
- Range of benchmark values for this graphics card - Average benchmark values for this graphics card * Smaller numbers mean a higher performance 1 This benchmark is not used for the average calculation
The following benchmarks stem from our benchmarks of review laptops. The performance depends on the used graphics memory, clock rate, processor, system settings, drivers, and operating systems. So the results don't have to be representative for all laptops with this GPU. For detailed information on the benchmark results, click on the fps number.