NVIDIA GeForce GTX 1060 Max-Q vs Intel Arc A550M vs Intel Arc A310

NVIDIA GeForce GTX 1060 Max-Q

The Nvidia GeForce GTX 1060 with the Max-Q design is a mobile high-end GPU from the Pascal series. It is designed for thin and light laptops and about 10-15% slower than a regular GTX 1060 for laptops based on the cooling capabilities. The base frequency (1063-1265 MHz) is also much lower than on the regular GTX 1060 (1506 MHz, at least -16%) and the Boost (1341-1480 MHz) is also much lower compared to 1708 MHz (at least -13%) for the regular GTX 1060. The memory clock, however, is identical.

The clock is not the only difference compared to the regular GTX 1060 though. The drivers for the Max-Q version were optimized for efficiency (and not performance; only for Max-Q models), there are optimized voltage converters for 1V operation, high-end cooling methods, and a 40 dB limit for the fan noise (with clock adjustments to ensure this at all times).

Features

The GP106 chip is produced in 16nm FinFET at TSMC and offers a range of new features, like DisplayPort 1.4 (ready), HDMI 2.0b, HDR, Simultaneous Multi-Projection (SMP) and improved H.265 video de- and encoding (PlayReady 3.0). A list of improvements and features can be found in our article on the Pascal architecture.

The power consumption of the Max-Q design is notably lower than the normal GTX 1060 for laptops and ranges between 60 and 70 Watt (TGP) according to Nvidia.

Intel Arc A550M

The Intel Arc A550M (device ID 5692) is a dedicated mobile lower- mid-range graphics card for laptops based on Xe HPG microarchitecture. It uses the ACM-G10 chip and offers 16 of the 32 Xe-cores (256 ALUs), 16 ray tracing units and a 128-bit memory bus for 8 GB GDDR6 graphics memory. The cores can clock from 300 MHz (low frequency mode) to 900 MHz (high frequency) or in short bursts 2050 MHz (short bursts / Turbo). The chip integrates 21.7 billion transistors, uses a BGA2660 package and the die measures 406 mm2.

The performance of the Arc A550M should be between the Radeon RX 6500M and 6600M and therefore well suited even for demanding games in medium to high detail settings and 1080p. The slower Arc A370M is based on the smaller ACM-G11 chip and should be significantly slower.

The chip also integrates two media engines for VP9, AVC, HEVC, and AV1 8k en- and decoding. The 4 display pipes support up to 4x 4k120 HDR via DMI 2.0B or DisplayPort 2.0 10G. 

The A550M is produced in 6nm at TSMC (N6 process) and supports dynamic power share (using Deep Link) with 12th gen Intel CPUs (Alder Lake).

Intel Arc A310

The Intel Arc A310 is a dedicated entry-level graphics card from Intel for desktops. It is based on the ACM-G11 chip and offers 6 of the 8 Xe cores (96 ALUs), 6 of the 8 ray tracing units, 1.152 MB L1 cache and 4MB L2 cache. The memory interface is 64 bits wide and supports 4GB GDDR6 graphics memory with 15.5 Gbps. The TGP is between 40 and 75 watts depending on the model.

The A310 is similar to the mobile Arc A350Mexcept for the higher clock rates of the cores and memory.

The ACM-G11 chip is manufactured at TSMC in 6nm (N6 process) and offers 7.2 billion transistors and is 157 mm2 in size. It integrates two media engines for VP9, AVC, HEVC, AV1 8k60 12-bit HDR decoding and 8k 10-bit HDR encoding. The integrated 4 display pipes support 4x 4k120 HDR, HDMI 2.0B, DP 2.0 10G and Adaptive Sync.