AMD Radeon RX 570 (Desktop) vs NVIDIA GeForce GTX 1070 (Desktop) vs AMD Radeon RX 590 (Desktop)

AMD Radeon RX 570 (Desktop)

The AMD Radeon RX 570 is a mainstream graphics card for desktop PCs. It was announced in April 2017 and is based on the Polaris 20 chip. It is a refresh of the RX 470 and uses the same chip as the RX 580 (and 580X) with less shaders. The clock speeds are specified as 1,168 - 1,244 (Boost). The VRAM is connected by a 256 Bit bus and clocks at 1,750 MHz (effective 7,000 MHz) which leads to a 224 GB/s memory bandwidth.

At launch, the performance of the Radeon RX 570 was slightly below a Nvidia GeForce GTX 1060. Therefore, the GPU is best used for 1920x1080 and high detail settings for demanding games of 2019.

The TDP of the Radeon RX 570 is specified with 120 Watts by AMD, so a single 6-pin power connector is sufficient.

NVIDIA GeForce GTX 1070 (Desktop)

The Nvidia GeForce GTX 1070 is the second fastest Pascal based graphics card in mid May 2016. It is a high-end desktop graphics card. The mobile pendant is also called GeForce GTX 1070, but features more shaders and a lower core clock (see this page for details on the laptop version of the GTX 1070). Both cards are based on a cut down GP104 chip as the GTX 1080 and manufactured in 16 nm FinFET at TSMC. More details on the Pascal architecture including all features and comparisons to Maxwell, can be found here.

Compared to the GTX1080, the GTX1070 features less CUDA cores (1920 versus 2560) that are clocked a bit lower (maximum Boost 1683 versus 1733). Instead of the new GDDR5X, the GTX 1070 uses slower GDDR5 graphics memory - but still 8 GB. The TDP is also reduced from 180 Watt to 150 Watt.

The performance of the GTX 1070 is between the old GTX 980 Ti and the GTX 1080. Therefore, gaming in 4k at high details is possible with the card and also VR gaming is possible.

AMD Radeon RX 590 (Desktop)

The AMD Radeon RX 590 is a desktop graphics card positioned in the mid-range of 2018. It is manufactured in 12nm and offers 2,304 shader cores and 8 GB GDDR5 VRAM using a 256 Bit memory interface (8 GHz, 256 GB/s).

The RX590 uses the new Polaris 30 chip, which is a 12nm version of the Polaris 20 chip of the RX 580. Thanks to the improved process, the clock rates of the RX 590 can be higher at a similar power consumption. 

This leads to a 10 percent higher performance compared against the older Radeon RX 580 and therefore the RX 590 is faster than the GeForce GTX 1060. This means that the card is best suited for 1080p gaming in max. details (of 2018 games).

The power consumption is rated at 175 Watt and therefore 10 Watts below the Radeon RX 580 (185 Watt).