NVIDIA Quadro P3200 vs NVIDIA GeForce GTX 1070 SLI (Laptop) vs NVIDIA Quadro P5000

NVIDIA Quadro P3200

The Nvidia Quadro P3200 is a mobile high-end workstation graphics card for notebooks. As the slightly faster Quadro P4000, it is based on the GP104 chip and uses 1792 CUDA cores. The memory bus however is slightly narrower at 192 versus 256 Bit. The clock rate should be similar, as Nvidia also specifies 5.3 TFLOPs of peak performance.

The Quadro GPUs offer certified drivers, which are optimized for stability and performance in professional applications (CAD, DCC, medical, prospection, and visualizing applications). The performance in these areas is therefore much better compared to corresponding consumer GPUs.

Performance

The performance should be slightly below the older Quadro P4000, due to the same peak performance of the shaders but a slower memory bus. Compared to the old Quadro M3000M, the P3200 should offer a 93% better overall performance in SpecViewPerf 12.

Power Consumption

The power consumption of the Quadro P3200 is 75 Watts TGP (including memory)  and therefore similar to the Quadro P3000.

NVIDIA GeForce GTX 1070 SLI (Laptop)

The Nvidia GeForce GTX 1070 SLI for laptops is a combination of two GTX 1070 graphics cards in SLI mode. Each card renders one frame at a time (AFR mode) but depends for most games on a good profile in the driver. Therefore, the performance can range from no gains over a single GTX 1070 to up to 90% faster performance. In most games with SLI support, the GTX 1070 SLI is therefore faster than a single GTX 1080. However, sometimes the combination also suffers from micro-stuttering.

The technical details of the card are identical to a single GTX 1070 (see for more information) and the power consumption is doubled. Therefore, the 1070 SLI combination is only found in huge clunky laptops.

NVIDIA Quadro P5000

The Nvidia Quadro P5000 is a mobile high-end workstation graphics card for notebooks. Similar to the consumer GeForce GTX 1070 (Laptop), it is based on a slimmed-down GP104 chip with 2048 shaders. The graphics card is designed for the Kaby Lake generation and is the successor to the Quadro M5000M (Maxwell). However, the P5000 is equipped with 16 GB GDDR5 video memory (at a lower bandwidth), while GTX 1070 is limited to 8 GB. The clock rates range between 1164 MHz (base) to 1506 MHz (typical Boost) and up to 1657 MHz (max.). 

The Quadro GPUs offer certified drivers, which are optimized for stability and performance in professional applications (CAD, DCC, medical, prospection, and visualizing applications). The performance in these areas is therefore much better compared to corresponding consumer GPUs.

Performance

The theoretical performance should be on par with the GTX 1070 (if the clocks did not take a massive hit), so the GPU should be significantly faster than the previous M5000M. Even the old M5500M could be beaten.

Power Consumption

The power consumption of the Quadro P5000 is similar to the old Quadro M5000M at 100 Watts TGP (max power consumption incl. memory) resp. 73.4 W TDP according to Nvidia. The card is therefore suited for large 17-inch notebooks.