NVIDIA GeForce GTX 1050 (Desktop) vs AMD Radeon RX 570 (Desktop)

NVIDIA GeForce GTX 1050 (Desktop)

The Nvidia GeForce GTX 1050 is an entry level graphics card for desktops based on the Pascal architecture. It uses the same GP107 chip as the GTX 1050 Ti, but with only 640 instead of 768 shaders. The chip is manufactured at Samsung in 14 nm (opposed to the 16 nm TSCM based Pascal chips of the 1060 and up). The performance and specs should be similar to the GTX 1050 laptop version, that will be released later (early 2017). Compared to the faster GTX 1050 Ti, the 1050 offers less shaders (640 instead of 768) and only 2 GB of GDDR5 (instead of the 4 GB of the 1050 Ti).

Gaming benchmarks by Nvidia state that the GTX 1050 is about 30% faster on average than the Radeon RX 460 with 2 GB VRAM. The 4 GB version of the RX 460 should be about 10% slower and the older GTX 950 should reach a similar performance level as the new GTX 1050. Therefore, the GTX 1050 should be ideal for 1080p gaming with high detail settings (but not max settings).

AMD Radeon RX 570 (Desktop)

The AMD Radeon RX 570 is a mainstream graphics card for desktop PCs. It was announced in April 2017 and is based on the Polaris 20 chip. It is a refresh of the RX 470 and uses the same chip as the RX 580 (and 580X) with less shaders. The clock speeds are specified as 1,168 - 1,244 (Boost). The VRAM is connected by a 256 Bit bus and clocks at 1,750 MHz (effective 7,000 MHz) which leads to a 224 GB/s memory bandwidth.

At launch, the performance of the Radeon RX 570 was slightly below a Nvidia GeForce GTX 1060. Therefore, the GPU is best used for 1920x1080 and high detail settings for demanding games of 2019.

The TDP of the Radeon RX 570 is specified with 120 Watts by AMD, so a single 6-pin power connector is sufficient.