AMD Radeon RX 560 (Laptop) vs NVIDIA GeForce GTX 1060 Max-Q vs NVIDIA GeForce GTX 1070 SLI (Desktop)

AMD Radeon RX 560 (Laptop)

The AMD Radeon RX 560 for laptops (RX 560M) is a mid-range Polaris 11 / 21 gaming graphics card for laptops. It was first shown at CES 2017 in the Lenovo Legion Y520 as the "AMD RX 560M" with up to 4 GB GDDR5 VRAM. As the desktop RX 560 it can be based on the Polaris 21 and 11 chip (RX 560 and RX 460) with 986 or 1024 shaders. The performance should be similar to the desktop variants, with slightly reduced clock speeds.

More information on the Polaris architecture and its features can be found here.

NVIDIA GeForce GTX 1060 Max-Q

The Nvidia GeForce GTX 1060 with the Max-Q design is a mobile high-end GPU from the Pascal series. It is designed for thin and light laptops and about 10-15% slower than a regular GTX 1060 for laptops based on the cooling capabilities. The base frequency (1063-1265 MHz) is also much lower than on the regular GTX 1060 (1506 MHz, at least -16%) and the Boost (1341-1480 MHz) is also much lower compared to 1708 MHz (at least -13%) for the regular GTX 1060. The memory clock, however, is identical.

The clock is not the only difference compared to the regular GTX 1060 though. The drivers for the Max-Q version were optimized for efficiency (and not performance; only for Max-Q models), there are optimized voltage converters for 1V operation, high-end cooling methods, and a 40 dB limit for the fan noise (with clock adjustments to ensure this at all times).

Features

The GP106 chip is produced in 16nm FinFET at TSMC and offers a range of new features, like DisplayPort 1.4 (ready), HDMI 2.0b, HDR, Simultaneous Multi-Projection (SMP) and improved H.265 video de- and encoding (PlayReady 3.0). A list of improvements and features can be found in our article on the Pascal architecture.

The power consumption of the Max-Q design is notably lower than the normal GTX 1060 for laptops and ranges between 60 and 70 Watt (TGP) according to Nvidia.

NVIDIA GeForce GTX 1070 SLI (Desktop)

The Nvidia GeForce GTX 1070 SLI for desktops is a combination of two GTX 1070 graphics cards in SLI mode. Each card renders one frame at a time (AFR mode) but depends for most games on a good profile in the driver. Therefore, the performance can range from no gains over a single GTX 1070 to up to 90% faster performance. In most games with SLI support, the GTX 1070 SLI is therefore faster than a single GTX 1080. However, sometimes the combination also suffers from micro-stuttering.

The technical details of the card are identical to a single GTX 1070 (see for more information) and the power consumption is doubled (2x 150 = 300 Watt).