Intel Xeon E-2276M vs Intel Core m3-7Y32

Intel Xeon E-2276M

The Intel Xeon E-2276M is a high-end processor for professional laptops with six cores based on the Coffee Lake architecture. The processor clocks at between 2.8 - 4.7 GHz and can execute up to twelve threads simultaneously thanks to Hyper-Threading / SMT. According to Intel, the CPU is manufactured in an improved 14nm (14nm++) process. Compared to the similar consumer Core i7-9850H, the mobile Xeon offers support for ECC main memory and clocks 100-200 MHz higher.

The Coffee Lake architecture is similar to Kaby Lake and differs only in the amount of cores (now six cores for the high end versions) and the improved 14nm process (14nm++ according to Intel).

Performance

The Xeon E-2276M is a high end processor in 2019 and therefore well suited for all tasks. Thanks to the high Turbo Boost, the single core performance is also very good. Long term performance however is very depending on good cooling and proper TDP settings and differs therefore for each laptop.

Graphics

The integrated Intel UHD Graphics P630 iGPU is the same as the old Intel HD Graphics P630 and the only difference to the UHD Graphics 630 in the consumer models are the professional drivers.

Power Consumption

Intel specifies the TDP with 45 watts and therefore the Xeon is only suited for big laptops with good cooling solutions.

Intel Core m3-7Y32

The Intel Core m3-7Y32 is a very efficient dual-core SoC for tablets and passively cooled notebooks based on the Kaby Lake architecture and was announced early 2017. It is the more or less the successor to the in 2016 introduced Core m3-7Y30 that offers 400 MHz less Turbo Boost clock speed. Thanks to Hyper Threading, the processor can execute up to four threads simultaneously. The chips also includes the Intel HD Graphics 615 GPU, a dual-channel memory controller (DDR3L/LPDDR3) as well as VP9 and H.265 video de- and encoder. It is still produced in a 14 nm process with FinFET transistors. 

Architecture

Intel basically used the familiar micro architecture from the Skylake generation, so the per-MHz performance is identical. Only the Speed-Shift technology for faster dynamic adjustments of the voltages and clocks was improved, and the matured 14 nm process now also enables much higher frequencies and better efficiency than before. 

Performance

Since Intel basically removed the Core m5 and Core m7 series or included them into the higher i5 and i7 series, respectively, the m3-7Y32 is officially the last Core-m chip (together with the former m3-7Y30). Thanks to its high Turbo clock, the 7Y32 can sometimes keep up with the 15 Watt models for short peak load and single-thread scenarios, but the clocks will drop significantly under sustained workloads. The CPU is still suitable for many more demanding applications as well as multitasking. Thanks to the improved efficiency, the CPU can often even beat the Core m5 and m7 siblings from the previous Skylake generation.

Graphics

The integrated Intel HD Graphics 615 GPU has 24 Execution Units (EUs) like the old HD Graphics 515 and runs with clocks between 300 and 900 MHz in combination with this processor. The performance heavily depends on the TDP limit as well as the memory configuration; with fast LPDDR3-1866 RAM in dual-channel mode, the GPU should sometimes be able to compete with the HD Graphics 520, but can also be much slower in other scenarios. Modern games from 2016 will, if at all, only run smoothly in the lowest settings.

Contrary to Skylake, Kaby Lake now also supports hardware decoding for H.265/HEVC Main10 with a 10-bit color depth as well as Google's VP9 codec.

Power Consumption

The chip is manufactured in an improved 14 nm process with FinFET transistors, so the power efficiency was once again improved significantly. The typical TDP for the Y-series is specified at 4.5 Watts, and can be adjusted in both directions depending on the usage scenario.