Intel Xeon E-2276M vs AMD Ryzen 5 8640HS vs Intel Xeon E-2186M

Intel Xeon E-2276M

The Intel Xeon E-2276M is a high-end processor for professional laptops with six cores based on the Coffee Lake architecture. The processor clocks at between 2.8 - 4.7 GHz and can execute up to twelve threads simultaneously thanks to Hyper-Threading / SMT. According to Intel, the CPU is manufactured in an improved 14nm (14nm++) process. Compared to the similar consumer Core i7-9850H, the mobile Xeon offers support for ECC main memory and clocks 100-200 MHz higher.

The Coffee Lake architecture is similar to Kaby Lake and differs only in the amount of cores (now six cores for the high end versions) and the improved 14nm process (14nm++ according to Intel).

Performance

The Xeon E-2276M is a high end processor in 2019 and therefore well suited for all tasks. Thanks to the high Turbo Boost, the single core performance is also very good. Long term performance however is very depending on good cooling and proper TDP settings and differs therefore for each laptop.

Graphics

The integrated Intel UHD Graphics P630 iGPU is the same as the old Intel HD Graphics P630 and the only difference to the UHD Graphics 630 in the consumer models are the professional drivers.

Power Consumption

Intel specifies the TDP with 45 watts and therefore the Xeon is only suited for big laptops with good cooling solutions.

AMD Ryzen 5 8640HS

The Ryzen 5 8640HS is a mid-range, Hawk Point family processor that was unveiled in Q4 2023. The 8640HS isn't actually a new chip; instead, it's a rebadged Ryzen 5 7640U with a slightly higher wattage as well as higher clock speeds on the Ryzen AI NPU. The 8640HS has 6 SMT-enabled cores (12 threads) running at 3.5 GHz to 4.9 GHz. Those Zen 4 architecture cores are mated to the Radeon 760M integrated graphics adapter.

Architecture & Features

Hawk Point chips are powered by the Zen 4 architecture, much like Phoenix and Dragon Range family chips are. That's not to say there is no difference between the three. With Hawk Point, AMD is betting big on generative AI; these processors are set to deliver an up to 40% increase in generative AI performance over 7040 series APUs.

Unlike Zen 3, Zen 4 features AVX512 support and, thanks to a plethora of other improvements including larger caches/registers/buffers, is slated to deliver a double-digit IPC improvement over the former.

Elsewhere, the 8640HS has 16 MB of L3 cache and USB 4 support (therefore, Thunderbolt is supported as well). The chip is compatible with DDR5-5600 and LPDDR5x-7500 RAM which is still impressive as of late 2023.

A system powered by this Ryzen 5 will have access to twenty PCIe 4 lanes; this means a speedy enough NVMe SSD will be able to deliver speeds up to 7.8 GB/s.

Systems powered by this APU are expected to run 64-bit Windows 11, 64-bit Windows 10, or Linux. Like most laptop chips, the 8640HS is neither overclockable nor user-replaceable. It gets soldered to the motherboard for good (FP7, FP7r2, FP8 socket interfaces).

Performance

It's safe to expect the APU to be at least 15% faster than the Zen 3 Plus-powered Ryzen 5 6600U (6 cores, 12 threads, up to 4.5 GHz), as far as multi-thread performance is concerned.

Your mileage may vary depending on how high the CPU power limits are and how competent the cooling solution of your laptop is.

Graphics

The Radeon 760M has 8 CUs (512 shaders) running at up to 2,600 MHz. While not great for gaming (unless you are fine with resolutions such as 900p and low detail settings), the iGPU will let you use up to 4 monitors with resolutions as high as SUHD 4320p. It also HW-decodes and HW-encodes the most widely used video codecs including AV1, HEVC, AVC without breaking a sweat.

Power consumption

The 8640HS has a long-term power limit (default TDP) of 28 W that laptop makers are free to change to anything between 20 W and 30 W. Most companies will probably go for a higher value to get better performance. Either way, an active cooling solution is a must for any system powered by the chip.

Last but not the least, the 8640HS is manufactured on TSMC's 4 nm process for high, as of late 2023, energy efficiency.

Intel Xeon E-2186M

The Intel Xeon E-2186M is a high-end processor for professional laptops with six cores based on the Coffee Lake architecture. The processor clocks at between 2.9 - 4.8 GHz (4.3 GHz with 6 cores) and can execute up to twelve threads simultaneously thanks to Hyper-Threading. The 4.8 GHz can only be reached using the "Thermal Velocity Boost" which allows one core to boost to 4.8 GHz (+200 MHz) as long as the CPU temperature is below 50°C. Multiple cores can be boosted +100 MHz below 50°C.

According to Intel, the CPU is manufactured in an improved 14nm (14nm++) process. Together with the Core i9-8950HK, the E-2186M is the fastest mobile processor in early 2018. Compared to the similar consumer Core i9, the mobile Xeon offers support for ECC main memory but has a locked multiplicator (no overclocking).

The Coffee Lake architecture is similar to Kaby Lake and differs only in the amount of cores (now six cores for the high end versions) and the improved 14nm process (14nm++ according to Intel).

Performance

Due to the two additional cores, performance has increased by almost 50% compared to a similar clocked Kaby Lake processor.

Graphics

The integrated Intel UHD Graphics 630 iGPU is supposed to offer a slightly higher performance as its clock rate has been increased by 50 MHz. The architecture is identical to that of the Intel HD Graphics 630. We do expect a performance improvement, but as a low-end solution it will probably only display current games smoothly at reduced details - if at all.

Power Consumption

Intel specifies the TDP with 45 watts and therefore the i9 is only suited for big laptops with good cooling solutions.