Intel Core i7-1365U vs Intel Core i7-10700 vs Intel Core i9-10900K

Intel Core i7-1365U

The Intel Core i7-1365U is a high-end mobile CPU for thin and light laptops based on the Alder Lake architecture (Raptor Lake-U / RPL-U series). It was announced in early 2023 and offers 2  performance cores (P-cores, Golden Cove architecture) and 8 efficient cores (E-cores, Gracemont architecture). The P-cores support Hyper-Threading leading to 12 supported threads when combined with the E-cores. The clock rate ranges from 1.8 to 5.2 GHz on the performance cluster and 1.3 to 3.9 GHz on the efficient cluster. The performance of the E-cores should be similar to old Skylake cores (compare to the Core i7-6700HQ). All cores can use up to 12 MB L3 cache. The CPU supports all "Enterprise" vPro management features. Compared to the P-series (28W) or H-series (45W), the 15W TDP may limit the sustained performance.

Performance

Thanks to the high clock speed, the Core i7-1365U should perform slightly better than the older core i7-1265U (up to 4.8 GHz).

Architecture

The integrated memory controller supports various memory types up to LPDDR5-6400. The Thread Director (in hardware) can support the operating system to decide which thread to use on the performance or efficient cores for the best performance. For AI tasks, the CPU also integrates GNA 3.0 and DL Boost (via AVX2). Quick Sync in version 8 is the same as in the Rocket Lake CPUs and supports MPEG-2, AVC, VC-1 decode, JPEG, VP8 decode, VP9, HEVC, and AV1 decode in hardware. The CPU still only supports PCIe 4.0 x8 for a GPU and two PCIe 4.0 x4 for SSDs.

The integrated graphics card is based on the Xe-architecture and offers all 96 EUs (Execution Units) operating at up to 1.3 GHz.

Power consumption

This Core i7 CPU is rated at a TDP of 15W (base power, PL1) and a maximum turbo power of 55W (PL2). The RPL-U processors are built in a further improved Intel 7 process (10nm SuperFin) that allows higher clock rates.

Intel Core i7-10700

The Intel Core i7-10700 is a high-end desktop CPU based on the Comet Lake architecture. The CPU offers 8 cores and 16 threads clocked at 2.9 - 4.8 GHz. All cores can run at up to 4.6 GHz.

Compared to the older Core i7-9700, the 10700 now enables HyperThreading and therefore in some applications a nice performance boost. The single core performance is quite similar.

The chip is manufactured on 14nm++ process at Intel. The TDP is rated at 65 Watt (PL1) but the PL2 is set to 224 Watt for short term boosts (up to 28 seconds).

Intel Core i9-10900K

The Intel Core i9-10900K is a high-end processor for desktops with ten cores based on the Comet Lake architecture (CML-S, 4th generation of Skylake). The processor clocks at between 3.7 and 5.3 GHz (all 10 cores up to 4.8 GHz) and can execute up to twenty threads simultaneously thanks to Hyper-Threading. The 5.3 GHz can be only achieved below 70°C core temperature (Thermal Velocity Boost of 100 MHz).

The processor is still manufactured in the old 14nm (14nm++) process. Compared to the predecessor, the Core i9-9900K, the 10900K offers increased clock speeds and two more cores. Thanks to the free multiplicator, the CPU can also be easily overclocked (but may not have much headroom).

The Comet Lake architecture is similar to Coffee Lake and offers the same features and is produced in the same 14nm process. Other than the improved clock rates, the memory controller now also supports faster DDR4-2933 RAM. More information on Comet Lake and all the models and articles on it can be found here.

Performance

Thanks to the high Turbo Boost, the CPU is the fastest gaming CPU available at the time of announcement. Using all cores, the i9 however is slower than the top Ryzen CPUs (like the Ryzen 9 3950X) which offer more cores.

Graphics

The integrated Intel UHD Graphics 630 iGPU is supposed to offer a similar performance as the UHD630 in the Core i7-9900K. As a  low-end solution it will only run current games smoothly at reduced details - if at all.

Power Consumption

Intel specifies the TDP with 125 Watts (PL1) but under full load up to 250 Watt are consumed (PL2). In default mode these 250 Watt and therefore high clock speeds can be maintained for up to 56 seconds, however, all boards offer the option to alter these settings.