Intel Core i3-7100H vs Intel Celeron J4005

Intel Core i3-7100H

The Intel Core i3-7100H is a dual-core processor for notebooks based on the Kaby Lake architecture and was announced in January 2017. It is probably based on the quad-core die from the other H-series processor with two deactivated cores considering the TDP and the integrated HD Graphics 630. The two CPU cores run at 3GHZ without a Turbo, and the processor can execute up to four threads simultaneously thanks to Hyper Threading. It is also equipped with an Intel HD Graphics 630 GPU, a dual-channel memory controller (DDR4) as well as VP9 and H.265 video decoding as well as encoding. The chip is still manufactured in a 14nm process with FinFET transistors.

Architektur

Intel basically uses the same micro architecture compared to Skylake, so the per-MHz performance does not differ. The manufacturer only reworked the Speed Shift technology for faster dynamic adjustments of voltages and clocks, and the improved 14nm process allows much higher frequencies combined with better efficiency than before.

Performance

Compared to the similarly branded, but much more efficient Core i3-7100U (2.4 GHz, 15-Watt TDP), the i3-7100H has much higher clocks and the performance is almost on par with theCore i5-7200U (2.5-3.1 GHz).

Graphics

The integrated Intel HD Graphics 630 has 24 Execution Units (similar to previous HD Graphics 530) running at 350 - 950 MHz in this case. The performance depends a lot on the memory configuration. Compared to HD 620 GPUs, the higher TDP could result in better sustained performance.

Contrary to Skylake, Kaby Lake now supports hardware decoding for H.265/HEVC Main 10 with a 10-bit color depth as well as Google's VP9 codec. The dual-core Kaby Lake processors, which were announced in January, should also support HDCP 2.2.

Power Consumption

The chip is manufactured in an improved 14nm process with FinFET transistors, which improves the efficiency even further. The TDP is pretty high for a dual-core processor at 35 Watts, so the CPU is not suited fpr thin and light notebooks (where the i3-7100U comes into play).

Intel Celeron J4005

The Intel Celeron J4005 is a dual-core desktop SoC primarily for mini PCs and mini ITX mainboards. It runs at 2 - 2.7 GHz (Single Core Burst) and is based on the Gemini Lake platform. Similar to the Apollo Lake predecessor, the chip is manufactured in a 14 nm process with FinFETs but offers slightly improved processor cores, double the amount of L2 cache, a smaller package, a new generation of monitor outputs (Gen 10) and a partly integrated WiFi chip. Besides four CPU cores, the chip also includes a DirectX 12 capable GPU as well as a DDR4/LPDDR4 memory controller (dual-channel, up to 2400 MHz). The SoC is not replaceable as it is permanently soldered to the mainboard.

Architecture

The processor architecture was slightly reworked and is now called Goldmont Plus. It features an increased level 2 cache (to 4 MB). That means the per-clock-performance should be a bit better, but not anywhere near the Core CPUs like Kaby Lake Y.

Performance

The average J4005 in our database is in the same league as the Celeron N3450 and the Celeron 3865U, as far as multi-thread benchmark scores are concerned. This is an abysmally poor result, as of early 2023.

Power consumption

This Celeron series chip has a default TDP, also known as the long-term power limit, of 10 W. That's not much at all and thus good enough for passively cooled tablets, laptops and mini-PCs.

The J4005 is built with one of Intel's old 14 nm processes for poor, as of early 2023, energy efficiency.