AMD A9-9420e vs Intel Core i7-7920HQ

AMD A9-9420e

The AMD A9-9420e is an entry-level chip from the Stoney-Ridge APU series for notebooks (7th APU generation). It was first found in the Dell Inspiron 3000 with passive cooling and 4 GB DDR4 RAM. The performance in that device was way below the normal A9-9420 as the clock speed only reached up to 2,5 GHz. It also includes a Radeon R5 GPU with 192 shaders as well as a single-channel DDR4-2133 memory controller, H.265 video engine and chipset with all I/O ports.

Architecture

Stoney Ridge is the successor of the Carrizo architecture and the design is almost identical. Thanks to optimized manufacturing processes and more aggressive Boost behavior, however, the clocks are a bit higher at the same power consumption. The memory controller now also supports DDR4-RAM, in this case up to 2133 MHz. Stoney Ridge is the designation for the smaller dual-core and single-core chip, while Bristol Ridge is the bigger quad-core chip with dual-channel memory controller. More technical details are available in the following articles:

• AMD's Bristol Ridge and Stoney Ridge Architecture
• AMD: Bristol Ridge APUs announced

Power Consumption

AMD specifies the TDP of the A9-9420 between 10-25 Watts, but the passively cooled A9-9420e should be positioned lower than 9 Watt.

Intel Core i7-7920HQ

The Intel Core i7-7920HQ is a fast quad-core processor for notebooks based on the Kaby Lake architecture and was announced in January 2017. It is the top model of the consumer series at the time of the announcement. Only the Xeon E3-1535M v6 is faster (100 - 200 MHz higher Turbo clocks). Besides four cores including Hyper-Threading support running at 3.1-4.1 GHz (4 cores up to 3.7 GHz, 2 cores up to 3.9 GHz), the processor is also equipped with the HD Graphics 630 GPU as well as a dual-channel memory controller (DDR3L-1600/DDR4-2400). It is manufactured in a 14nm process with FinFET transistors.

Architecture

Intel basically uses the same micro architecture compared to Skylake, so the per-MHz performance does not differ. The manufacturer only reworked the Speed Shift technology for faster dynamic adjustments of voltages and clocks, and the improved 14nm process allows much higher frequencies combined with better efficiency than before.

Performance

The performance is a bit higher compared to the Skylake predecessor Core i7-6920HQ (2.9-3.8 GHz) thanks to slightly higher clocks (up to 7.9%), so it is the fastest mobile consumer processor in the beginning of 2017 (mobile Xeon E5-1535M v6 has even higher Turbo clocks). The performance is sufficient even for very demanding tasks and on par with powerful desktop quad-core processors.

Graphics

The integrated Intel HD Graphics 630 has 24 Execution Units (similar to previous HD Graphics 530) running at 350 - 1100 MHz. The performance depends a lot on the memory configuration; it should be comparable to a dedicated Nvidia GeForce 920M in combination with fast DDR4-2133 dual-channel memory.

Contrary to Skylake, Kaby Lake now supports hardware decoding for H.265/HEVC Main 10 with a 10-bit color depth as well as Google's VP9 codec. The dual-core Kaby Lake processors, which were announced in January, should also support HDCP 2.2.

Power Consumption

The chip is manufactured in an improved 14nm process with FinFET transistors, which improves the efficiency even further. Intel still specifies the TDP with 45 Watts, but it can also be reduced to 35 Watts by the notebook manufacturers (cTDP down). This will obviously affect the performance, because the Turbo Boost cannot be maintained for longer periods.