Deutsch
Español
Français
Italiano
Nederlands
Polski
Português
Русский
Türkçe
Svenska
Chinese
MagyarIntel Core 2 Duo T9500 vs Intel Core 2 Duo P7350 vs Intel Core 2 Duo SP9600
Intel Core 2 Duo T9500
► remove from comparison
The Intel Core 2 Duo T9500 was a upper middle class dual core CPU for laptops at the time of introduction. It was intended to be used in the Santa Rosa platform due to the 800 MHz FSB. The T9550 is only slightly higher clocked but offers already a FSB1066.
Due to the relatively high clock speed and 6MB Level 2 cache, the T9500 offers enough performance for demanding games (in 2009) and applications.
The T9500 uses a Penryn (Montevina Update) core that features 2 integer units, 1 floating point unit, 1 load unit, and 1 store unit in a 14-stages long pipeline. Due to the Wide Dynamic Execution Technology, the core is able to simultaneously execute up to four instructions.
The integrated Enhanced Speedstep is able to downclock the core dynamically to save power (in idle mode).
Intel Core 2 Duo P7350
► remove from comparisonThe Intel Core 2 Duo P7350 is a dual core processor for laptops. It features 2 GHz and a shared level 2 cache of 3 MB. It is based on the 45nm Penryn core, but Virtualization (VT-x) functions are disabled.
The P7550 uses a Penryn (Montevina Update) core that features 2 integer units, 1 floating point unit, 1 load unit, and 1 store unit in a 14-stages long pipeline. Due to the Wide Dynamic Execution Technology, the core is able to simultaneously execute up to four instructions.
The integrated Enhanced Speedstep is able to downclock the core dynamically as low as 800 MHz to save power (in idle mode).
Intel Core 2 Duo SP9600
► remove from comparison
The Intel Core 2 Duo SP9600 is a upper middle class dual core CPU for laptops, at the time of introduction. The SP9600 is basically a Core 2 Duo P9500 produced in a BGA Package for direct soldering on the mainboard. The package of the chip is therefore smaller and more suited for thin laptops. The power consumption is similar to the P9500.
Due to the relatively high clock speed and 6MB Level 2 cache, the SP9600 offers enough performance for most demanding games (in 2009) and applications.
The SP9600 uses a Penryn (Montevina Update) core that features 2 integer units, 1 floating point unit, 1 load unit, and 1 store unit in a 14-stages long pipeline. Due to the Wide Dynamic Execution Technology, the core is able to simultaneously execute up to four instructions.
The integrated Enhanced Speedstep is able to downclock the core dynamically to save power (in idle mode).
- Average benchmark values for this graphics card