Intel Core i5-2450M vs Intel Core i5-7Y57

Intel Core i5-2450M

The Intel Core i5-2450M is a fast dual core processor that first appeared in Dell laptops in 11/2011. It is based on the Sandy Bridge architecture and offers Hyperthreading to handle 4 threads at once (for a better usage of the pipeline). Compared to the faster Core i7, the i5 offers a smaller last level cache of 3MB. The base clock speed is 2.5 GHz but due to Turbo Boost it can reach 2.8 GHz (2 cores active) and 3.1 GHz (1 core active). Compared to the 2510M, the 2450M does not support VT-d and Trusted Execution functions. However, the integrated gpu offers a higher Turbo Boost clock rate.

Sandy Bridge is the evolutionary successor of the Arrandale architecture. The most noteable improvements is the improved Turbo Boost 2.0 and the integration of the graphics card into the 32nm CPU core. 

The i5-2450M offers an integrated graphics card (Intel HD Graphics 3000) which is clearly faster then the older Intel HD Graphics in the Arrandale CPUs. As the new GPU is included in the CPU, it is also manufactured in 32nm and shares the fast level 3 cache with the CPU cores (using a new ring bus). In the 2435M it is clocked with  650 or 1300MHz (with Turbo Boost).

Furthermore, an improved dual-channel DDR3 memory controller is included on the CPU die that is used by the CPU and GPU part.

Due to the improved architecture and the new Turbo Boost 2.0, the average performance of the Core i5-2450M is higher than a similar clocked Arrandale Core i5. Looking at benchmarks of slower clocked Core i5 CPUs, the i5-2450M should position itself slightly above the old Core i5-620M and is therefore suited even for demanding tasks.

The 35W TDP rating includes the integrated GPU and memory controller.

Intel Core i5-7Y57

The Intel Core i5-7Y57 is a very efficient dual-core SoC for tablets and passively cooled notebooks based on the Kaby Lake architecture and was announced in the Q1/2017. It is a slightly faster version of the Core i5-7Y54 (1.2-3.2 GHz). The CPU consists of two processor cores clocked at 1.2-3.3 GHz (2-core Turbo 2.9 GHz). Thanks to Hyper Threading, the processor can execute up to four threads simultaneously. The chips also includes the Intel HD Graphics 615 GPU, a dual-channel memory controller (DDR3L/LPDDR3) as well as VP9 and H.265 video de- and encoder. It is still produced in a 14 nm process with FinFET transistors. 

Architecture

Intel basically used the familiar micro architecture from the Skylake generation, so the per-MHz performance is identical. Only the Speed-Shift technology for faster dynamic adjustments of the voltages and clocks was improved, and the matured 14 nm process now also enables much higher frequencies and better efficiency than before. 

Performance

Despite the changed designation, the Core i5-7Y57 is the successor to the Core m5-6Y57 (Skylake Y-series), so the chip does not reach the performance level of other Core i processors due to the lower TDP. Thanks to its high Turbo clock, the 7Y57 can sometimes keep up with the 15 Watt models for short peak load and single-thread scenarios, but the clocks will drop significantly under sustained workloads. The CPU is still suitable for many more demanding applications as well as multitasking. 

Graphics

The integrated Intel HD Graphics 615 GPU has 24 Execution Units (EUs) like the old HD Graphics 515 and runs with clocks between 300 and 950 MHz in combination with this processor. The performance heavily depends on the TDP limit as well as the memory configuration; with fast LPDDR3-1866 RAM in dual-channel mode, the GPU should sometimes be able to compete with the HD Graphics 520, but can also be much slower in other scenarios. Modern games from 2016 will, if at all, only run smoothly in the lowest settings.

Contrary to Skylake, Kaby Lake now also supports hardware decoding for H.265/HEVC Main10 with a 10-bit color depth as well as Google's VP9 codec.

Power Consumption

The chip is manufactured in an improved 14 nm process with FinFET transistors, so the power efficiency was once again improved significantly. The typical TDP for the Y-series is specified at 4.5 Watts, and can be adjusted in both directions depending on the usage scenario.