Intel Core Ultra 5 235U vs Intel Core i7-13800H vs Intel Core Ultra 5 225U

Intel Core Ultra 5 235U

The Intel Core Ultra 5 235U is an upper mid-range CPU with 12 cores from the Meteor Lake U series, which was introduced at the beginning of 2025. The chip is similar to the Meteor Lake U series, but the compute part is manufactured in the modern Intel 3 process and therefore offers higher clock rates.

The chip continues to rely on a tile/chiplet design. The smaller compute tile (compared to the H processors) offers 2 performance cores (P cores, Redwood Cove architecture, SMT) and 8 efficiency cores (E cores, Crestmont architecture). The P-cores support hyperthreading (therefore 14 threads together) and clock up to 4.9 GHz. The E-cores clock at a maximum of 4.1 GHz. In addition, there are now two more low-power efficiency cores with up to 2.4 GHz on the low-power island; the compute tile can therefore be completely deactivated when idle and during simple tasks in order to save power.

Performance

Due to the higher clock rates and the support of faster memory, the performance is slightly above the old top model Core Ultra 5 165U (12 cores, max 4.9 / 3.8 GHz, 12 MB cache).

Graphics unit

The Core Ultra 5 135U offers a new Arc-based iGPU called Intel Graphics with 4 Xe cores and 64 EUs that reach a maximum of 2.05 GHz. However, the performance is far below the new Arc iGPU in the H series.

Features

Arrow Lake-U has integrated WiFi 6E (WiFi 7 optional). The integrated memory controller now supports LPDDR5/x-8400 or DDR5-6400 (max. 128 GB). A dedicated NPU (2x Gen3 Neural Compute Engines) is now used. The Xe Media Engine supports MPEG-2, AVC, VC-1 Decode, JPEG, VP8 Decode, VP9, HEVC and AV1 Decode up to 8K 10-bit HDR. The chip now supports PCIe-5.0 (x8 for GPU) and PCIe-4.0 (three x12 for SSDs).

Power consumption

The Intel Core Ultra 5 135U is specified with 15 watts TDP (base) and 57 watts (PL2) max. turbo power. Meteor Lake consists of five individual chips, whereby the processor part is manufactured in the new Intel 3 process (5nm). The graphics unit is produced at TSMC in N5 and the SoC and I/O tile in the older N6 process. These 4 chips are then applied to the 22nm base tile using the Foveros process.

Intel Core i7-13800H

The Intel Core i9-13900H is a high-end mobile CPU for laptops based on the Raptor Lake-H series (Alder Lake architecture). It was announced in early 2023 and offers 6 performance cores (P-cores, Golden Cove architecture) and 8 efficient cores (E-cores, Gracemont architecture). The P-cores support Hyper-Threading leading to 20 supported threads when combined with the E-cores. The clock rate ranges from 2.5 to 5.2 GHz (single core turbo, all-core 4.8 GHz) on the performance cluster and 1.8 to 4 GHz on the efficiency cluster. The performance of the E-cores should be similar to old Skylake cores (compare with the Core i7-6920HQ). All cores can use up to 24 MB L3 cache. The CPU supports the full set of vPro Enterprise management features.

Performance

Thanks to the high core count and high clock speed, the Core i7-13800H should be faster than the older Core i9-12900HK. Therefore, the CPU is very well suited for all demanding use cases like gaming, content creation, and scientific calculations.

Features

The integrated memory controller supports various memory types up to DDR5-5200 (up from 4800 MHz for the 12th gen). The Thread Director (in hardware) can support the operating system to decide which thread to use on the performance or efficient cores for the best performance. For AI tasks, the CPU also integrates GNA 3.0 and DL Boost (via AVX2). Quick Sync in version 8 is the same as in the Rocket Lake CPUs and supports MPEG-2, AVC, VC-1 decode, JPEG, VP8 decode, VP9, HEVC, and AV1 decode in hardware. The CPU now supports PCIe 5.0 x8 for a GPU and two PCIe 4.0 x4 for SSDs.

The integrated graphics card is based on the Xe-architecture and offers 96 EUs (Execution Units) .

The CPU is rated at 45 W base power (115 W PL2) but most laptops will use a PL1 of around 60 Watt. The SoC is manufactured in a 10nm process at Intel, which is known as Intel 7 (improved over the 12th Gen).

Intel Core Ultra 5 225U

The Intel Core Ultra 5 225U is an upper mid-range CPU with 12 cores from the Meteor Lake U series, which was introduced at the beginning of 2025. The chip is similar to the Meteor Lake U series, but the compute part is manufactured in the modern Intel 3 process and therefore offers higher clock rates.

The SoC continues to rely on a tile/chiplet design. The smaller compute tile (compared to the H processors) offers 2 performance cores (P cores, Redwood Cove architecture, SMT) and 8 efficiency cores (E cores, Crestmont architecture). The P-cores support hyperthreading (therefore 14 threads together) and clock up to 4.8 GHz. The E-cores clock at a maximum of 3.8 GHz. In addition, there are now two more low-power efficiency cores with up to 2.4 GHz on the low-power island; the compute tile can therefore be completely deactivated when idle and during simple tasks in order to save power.

Performance

Due to the higher clock rates and the support of faster memory, the performance is slightly below the old top model Core Ultra 7 165U (12 cores, max 4.9 / 3.8 GHz) and well ahead of the old Core Ultra 5 135U (12 cores, max 4.4 / 3.6 GHz).

Graphics unit

The Core Ultra 5 225U offers a new Arc-based iGPU called Intel Graphics with 4 Xe cores and 64 EUs that reach a maximum of 2 GHz. However, the performance is far below the new Arc iGPU in the H series.

Features

Arrow Lake-U has integrated WiFi 6E (WiFi 7 optional). The integrated memory controller now supports LPDDR5/x-8400 or DDR5-6400 (max. 128 GB). A dedicated NPU (2x Gen3 Neural Compute Engines) is now used. The Xe Media Engine supports MPEG-2, AVC, VC-1 Decode, JPEG, VP8 Decode, VP9, HEVC and AV1 Decode up to 8K 10-bit HDR. The chip now supports PCIe-5.0 (x8 for GPU) and PCIe-4.0 (three x12 for SSDs).

Power consumption

The Intel Core Ultra 5 225U is specified with 15 watts TDP (base) and 57 watts (PL2) max. turbo power. Meteor Lake consists of five individual chips, whereby the processor part is manufactured using the new Intel 3 process (5 nm). The graphics unit is produced at TSMC in N5 and the SoC and I/O tile in the older N6 process. These 4 chips are then applied to the 22 nm base tile using the Foveros process.