Qualcomm Snapdragon 865 vs HiSilicon Kirin 990 5G vs HiSilicon Kirin 990

Qualcomm Snapdragon 865

The Qualcomm Snapdragon 865 Mobile Platform is a high-end smartphone and tablet SoC that Qualcomm announced in December 2019. The SoC integrates a fast ‘Prime Core’ that clocks up to 2.84 GHz and three further fast ARM Cortex-A77 performance cores, which can reach up to 2.42 GHz. These are complemented by four power-saving ARM Cortex-A55 cores that clock up to a maximum of 1.8 GHz. The difference to the older Snapdragon 855 is the switch from Cortex-A76 to the faster Cortex-A77 architecture. The clock speeds stay the same. 

Therefore, the Snapdragon 865 takes the top spot in mobile processors for Android based systems. In some multi-core workloads, the SD865 can even perform on par with the Apple A13 SoC. Single thread, however is still a strong suit of the Apple SoCs.

Compared to the previous generations, the Snapdragon 865 does not integrate an LTE modem anymore, but has to be paired with the new X55 5G modem, that also supports LTE Cat 24/22. The Wi-Fi module however is still integrated and called FastConnect 6800 with support for Wi-Fi 6 (802.11ax) and 8x8 MU-MIMU and 60 GHz 802.11ay with up to 10 Gbps. Bluetooth 5.1 is also supported including aptX Adaptive.

The integrated GPU is now called Adreno 650 and should offer 20% more performance than the Adreno 640 in the Snapdragon 855.

The on board Hexagon 698 DSP now offers an improved KI performance of up to 15 TOPS (up from 7 TOPS in the 855) and still uses a combination of CPU, GPU, HVX and Tensor cores. The Spectra 480 ISP is now also significantly faster. The integrated Computer Vision Engine (CV-ISP) now supports Dolby Vision, 8K videos and 200 megapixel photos.

The built-in memory controller now supports LPDDR5 with up to 2,750 MHz and LPDDR4X with 2,133 MHz.

The Snapdragon 865 is manufactured at TSMC in the new improved 7nm process (N7P, DUV-based). The process offers a 7% higher performance or 10% less power consumption compared to the old N7 process.

HiSilicon Kirin 990 5G

The HiSilicon Kirin 990 5G is an ARM based high-end octa-core SoC for smartphones and tablets, which was introduced with the Huawei Mate 30 Pro in late 2019. It integrates eight CPU cores in three clusters. The performance cluster contains two Cortex-A76 cores with up to 2.86 GHz, the balanced cluster contains also two Cortex-A76 cores but with only up to 2.36 GHz and finally the power saving cluster contains four small ARM Cortex-A55 cores with up to 1.95 GHz. Furthermore, the SoC integrates a neural processor (2 + 1 cores) for AI tasks and a ARM Mali-G76 MP16 GPU clocked at up to 700 MHz. Compared to the 4G version, the 5G Kirin 990 integrates a Balong 5G modem and is slightly higher clocked (2 of the 3 clusters and the GPU).

The Kirin 990 5G is produced in the modern 7nm (7FF+ with EUV) process at TSMC, the 4G version is still produced in the slightly older 7nm process as the Kirin 980.

HiSilicon Kirin 990

The HiSilicon Kirin 990 4G is an ARM based high-end octa-core SoC for smartphones and tablets, which was introduced with the Huawei Mate 30 Pro in late 2019. It integrates eight CPU cores in three clusters. The performance cluster contains two Cortex-A76 cores with up to 2.86 GHz, the balanced cluster contains also two Cortex-A76 cores but with only up to 2.09 GHz and finally the power saving cluster contains four small ARM Cortex-A55 cores with up to 1.86 GHz. Furthermore, the SoC integrates a neural processor (1 + 1 cores) for AI tasks and a ARM Mali-G76 MP16 GPU clcoked at up to 600 MHz. Compared to the 5G version, the 4G Kirin 990 integrates a fast 4G modem and is slightly lower clocked (2 of the 3 clusters and the GPU).

The Kirin 990 is produced in the modern 7nm process at TSMC.