Kodak Luma 500: Compact projector sports WiFi and built-in battery
The Kodak Luma 500 is a compact projector with battery (Image source: C+A Global)
The Kodak Luma 500 is a new portable projector. It can play movies and TV shows without an external media player and supports large projections of up to 150 inches.
The Kodak Luma 500 is a new projector manufactured by licensee C+A Global. It's a compact projector that should be particularly well-suited for use on the go. It’s also advertised for outdoor use, but a typical problem with compact projectors could come into play here. Specifically, the Kodak Luma 500 has a low brightness of just 150 ANSI lumens, while some other portable projectors found on Amazon get significantly brighter.
According to the manufacturer, the Kodak Luma 500 offers a projection size of up to 150 inches at a distance of 12.5 ft and a projection ratio of 1.2:1. It’s questionable how feasible this best-case scenario is in real world usage, as the low brightness could be the limiting factor here.
Kodak's FHD projector itself measures 5 x 5 x 1.3 inches and weighs around 1.2 lbs. It runs on the Google TV 11 operating system, which means that a dedicated media player is not needed for streaming content from platforms like Netflix, Amazon Prime and Disney Plus. Furthermore, the Luma 500 supports WiFi and doesn’t require a power outlet since it features an integrated 10,500mAh battery. That said, external devices can be connected via HDMI, in which case there’s a 30ms input lag at a refresh rate of 60Hz.
Kodak Luma 500 Mini Projector | 1080p Full HD Portable Outdoor Projector with Wi-Fi, Bluetooth, HDMI & USB | Google TV 11.0 OS, Netflix Certified, Chromecast Built-In, 150 Lumens, 150” Display
Keystone correction can make it easier to set up Kodak's new projector (Image source: C+A Global)
Editor of the original article:Silvio Werner - Senior Tech Writer - 14593 articles published on Notebookcheck since 2017
I have been active as a journalist for over 10 years, most of it in the field of technology. I worked for Tom’s Hardware and ComputerBase, among others, and have been working for Notebookcheck since 2017. My current focus is particularly on mini PCs and single-board computers such as the Raspberry Pi – so in other words, compact systems with a lot of potential. In addition, I have a soft spot for all kinds of wearables, especially smartwatches. My main profession is as a laboratory engineer, which is why neither scientific contexts nor the interpretation of complex measurements are foreign to me.
Translator:Enrico Frahn - Managing Editor Accessory Reviews, Tech Writer - 4936 articles published on Notebookcheck since 2021
My fascination for technology goes back a long way to the Pentium II era. Modding, overclocking and treasuring computer hardware has since become an integral part of my life. As a student, I further developed a keen interest in mobile technologies that can make the stressful college life so much easier. After I fell in love with the creation of digital content while working in a marketing position, I now scour the web to bring you the most exciting topics in the world of tech. Outside the office, I’m particularly passionate about motorsports and mountain biking.