Intel Core i5-6500 vs Intel Celeron N5105 vs Intel Core i5-6400

Intel Core i5-6500

The Intel Core i5-6500 is a mid-range quad-core desktop processor based on the Skylake architecture, which was announced in August 2015. The CPU, which is manufactured in a 14 nm process, runs at 3.2 - 3.6 GHz and does not support Hyperthreading (only 4 threads simultaneously).

Architecture

Intel uses Skylake to replace both Broadwell as well as Haswell and therefore uses one core design for all TDP classes between 4.5-45 Watts. Several improvements of the Skylake architecture include bigger Out-to-Order-Buffer, optimizations for pre-fetching as well as bigger gains by Hyperthreading. However, the changes are small for a "Tock" – a new micro architecture – in general, so the per-MHz performance is only between 5-10 % (compared to Haswell) or less than 5 % higher (compared to Broadwell), respectively.

Performance

The performance is similar to the old Core i5-3570K of the Sandy Bridge generation. Therefore, it should be sufficient even for demanding tasks.

Graphics

Graphics are handled by the integrated Intel HD Graphics 530 with 24 EUs (Execution Units), which is clocked at 350 - 1050 MHz. Compared to the HD Graphics 4600 (Haswell, 20 EUs), the performance is increased by around 25 percent. The overall GPU performance is still low-end, so modern games can, if at all, only be played smoothly with low settings.

Power Consumption

Intel specifies the TDP with 65 Watts.

Intel Celeron N5105

The Intel Celeron N5105 is a quad-core SoC of the Jasper Lake series that is primarily intended for inexpensive desktops and was announced in early 2021. The four Tremont CPU cores clock between 2 and 2.9 GHz (single core Burst) and offer no HyperThreading (SMT). The N5105 uses 1.5 MB L2 and 4 MB L3 cache. The chip is manufactured in 10nm at Intel (most likely in the same process as Ice Lake).

CPU Architecture

The processor architecture is called Tremont and a complete redesign compared to the old Golmont Plus cores in the predecessor. According to Intel, the single thread performance of a core could be improved by 30% on average (10 - 80% in all tests of SPECint and SPECfp).

Features

In addition to the quad-core CPU block, the SoC integrates a 24 EU Intel UHD Graphics GPU clocked from 450 - 800 MHz and a LPDDR4(x) dual channel memory controller (up to 16 GB and 2933 MHz). The chip now also partly integrates Wi-Fi 6 (Gig+), 8 PCIe 3.0 lanes, 14 USB 2.0/ 3.2 ports and two SATA 6.0 ports. The package got bigger and measures 35 x 24 mm (compared to 25 x 24 mm for the N5030 e.g.). The SoC is directly soldered to the mainboard (BGA) and can't be easily replaced.

Performance

The average N5105 in our database is in the same league as the Core i3-1005G1 and the Ryzen 3 3250U, as far as multi-thread benchmark scores are concerned. Your mileage may vary depending on how high the CPU power limits are.

Power Consumption

Similar to the predecessor, Intel specifies the TDP with 10 Watts (mobile and lower clocked N5100 6W). The chip can therefore be cooled passively in theory, but SKUs with fans are possible as well.

Intel Core i5-6400

The Intel Core i5-6400 is a desktop class quad-core CPU. The additional 4 threads are not available to the CPU as it is missing the HyperThreading support. The i5-6400 is based on Skylake architecture and clocks within the 2.7 GHz to 3.3 GHz range.