Intel Celeron J1900 vs Intel Processor N200

Intel Celeron J1900

The Intel Celeron J1900 is a power efficient quad-core SoC for desktops and nettops. It is clocked at 2.0 - 2.42 GHz (Burst) and part of the Bay Trail-D platform. Thanks to the specially optimized 22 nanometer low-power process (P1271) with tri-gate transistors, performance and energy efficiency have been significantly improved compared to its predecessor.

Architecture

The processor cores are based on the new Silvermont architecture, which is an out-of-order design for the first time. The increased utilization of the pipeline and many other improvements (optimized branch prediction, increased buffers, enhanced decoders) have increased the performance per clock by about 50 percent. At the same time, however, the Hyper-Threading feature of the previous generation has been removed. Other major changes are the support for new instruction set extensions such as SSE 4.1 and 4.2 as well as AES-NI (depending on the model).

Performance

Thanks to 4 CPU cores and a clock speed of up to 2.42 GHz, the Celeron J1900 is significantly faster than previous Intel Atoms, e.g. the D2560. Presumably, the J1900 even outperforms the AMD Kabini APU A4-5000. For everyday tasks such as Internet or Office the performance is adequate, but not for very complex software or modern games.

Graphics

The HD Graphics (Bay Trail) is based on the Intel Gen7 architecture, which supports DirectX 11 and is also found in the Ivy Bridge series (e.g. HD Graphics 4000). With only 4 EUs (Execution Units) and a relatively low clock speed of up 688 - 854 MHz, the GPU is even slower than the HD Graphics (Ivy Bridge). Therefore, only older and less demanding games will run fluently.

Power Consumption

The entire SoC is rated at a TDP of 10 watts. Thus, the chip can be used in compact nettops.

Intel Processor N200

The Intel Processor N200 is an entry-level mobile CPU for thin and light laptops from the Alder Lake-N series. It was announced in early 2023 and offers no performance cores and 4 of the 8 efficient cores (E-cores, Gracemont architecture). The chip does not support HyperThreading and clocks with up to 3.7 GHz. The performance of the E-cores should be similar to old Skylake cores (compare to the Core i7-6700HQ). All cores can use up to 6 MB L3-cache. 

Performance

The performance is clearly lower than the Core i3-N300 and N305 due to the reduced core count. Compared to older processors, the N200 should be similar to a Core i5-8250U (4 cores with HyperThreading, 3.4 GHz, 15W) when the power limit is not restricting performance.

Features

The Alder Lake-N chips only support single channel memory with up to DDR5-4800, DDR4-3200 or LPDDR5-4800. The chip also supports Quick Sync and AV1 decoding (most likely same engine as in Alder Lake). Furthermore, Wi-Fi 6E and Bluetooth 5.2 are partly integrated (but no Thunderbolt). External chips can be connected via PCIe Gen3 x9 (via the PCH).

The integrated graphics adapter is based on the Xe-architecture and offersall 32 EUs (Execution Units) operating at only 450 - 750 MHz. Due to the single channel memory, low clock speeds and low shader count, the gaming performance of the iGPU is very limited.

Power consumption

The N200 has a base power consumption of only 6 W and is therefore suited for fanless cooling. The CPU is built with a further improved 10nm SuperFin process at Intel (called Intel 7).