Qualcomm Snapdragon 801 MSM8974AB vs JLQ JR510

Qualcomm Snapdragon 801 MSM8974AB

The Qualcomm Snapdragon 801 MSM8974AB is an ARM-based SoC for tablets and smartphones. It is built at TSMC in a 28nm HPM (High Performance Mobile) HKMG process, whereas the Snapdragon 600 was manufactured in 28nm LP. In addition to 4 CPU cores with a clock speed of up to 2.36 GHz, the chip also integrates an Adreno 330 GPU up to 578 MHz, an LPDDR3-1866 memory controller and various radio modules (UMTS/LTE, WiFi, Bluetooth, GPS). The slightly higher CPU/GPU clocks and faster memory support are the key differences to the Snapdragon 800 MSM8974.

Processor 

The CPU portion is based on Qualcomm's Krait architecture, which is compatible with the ARMv7 ISA. Compared to the Snapdragon 600 (Krait 300), the new Krait 400 cores of the Snapdragon 800/801 have been tweaked just slightly with faster L2 cache. Thanks to a clock rate of up to 2.36 GHz and a high performance per MHz somewhere between an ARM Cortex-A9 and a Cortex-A15, the Snapdragon 801 offers very strong CPU performance. The S801 competes with the Nvidia Tegra 4, Samsung Exynos 5420 and Apple A7 and is therefore one of the fastest ARM SoCs on the market as of 2013.

Graphics

Another difference between the Snapdragon 600 and 800/801 is the graphics unit. While the S600 implements an Adreno 320 (400 to 450 MHz), the S800 /S801 feature the faster Adreno 330 (MSM8974AB: 578 MHz). Both GPUs offer the same amount of texture units (8 TMUs), but the Adreno 330 has 50 percent more shaders (probably 6x SIMD16 vs. 4x SIMD16 of the previous generation). In conjunction with the higher memory bandwidth, the performance is significantly better. As a result, the Adreno 330 is slightly faster than the Mali-T628 (Exynos 5420) and the PowerVR G6430 (Apple A7). Depending on the device and cooling, however, the performance may vary. The GPU supports OpenGL ES 3.0 as well as OpenCL 1.2.

Features 

Furthermore, the MSM8974AB supports many wireless technologies: Bluetooth 4.0, WLAN, IEEE 802.11a/b/g/n/ac (2.4/5 GHz), GSM (GPRS, EDGE), W-CDMA/UMTS (HSDPA, HSUPA, HSPA+, cat.29 DC-HSPA+), MBMS, cat.4 LTE, CDMA2000 (1X RTT, 1 × EV-DO Rel.0/Rev.A/Rev.B, 1× EV-DO Rev.A MC, 1× Adv Rev.A/Rev.B) and TD-SCDMA. 

The MSM8974AB can encode and play UHD 4K videos in 3840x2160 at 30 FPS (120 Mbps H.264 High Profile) simultaneously via dedicated hardware. Moreover, it supports both USB 2.0 and 3.0 and cameras up to 55 megapixels and stereoscopic 3D.

Power Consumption

Thanks to the new 28nm HPM HKMG process, the energy efficiency has been improved significantly compared to its LP 28nm S600 predecessor. Depending on the field of application, the maximum power consumption should be about 3 W for smartphones or 4 W or greater for tablets. This should be similar to comparable ARM SoCs currently in the market. However, the MSM8974AB will likely to need a little more power than the slightly lower clocked MSM8974.

JLQ JR510

The JLQ JR510 is a lower mainstream SoC for (Android-based) smartphones and tablets by JLQ, a joint venture with Qualcomm and several Chinese companies.

The JLQ JR510 integrates eight ARM Cortex-A55 cores (similar to the Snapdragon 439) in two Clusters. 4 higher-clocked cores with up to 2 GHz and four power saving cores with up to 1.5 GHz.

The integrated graphics card is not an Adreno, but a ARM Mali G52MP1 (single cluster). Displays can be with resolutions up to 1080p/60Hz, for 720p 90 Hz is possible.

The JR510 also includes an AI accelerator with a theoretical performance of up to 1.23 TOPS. For connectivity, the SoC supports 4G (Cat4 / 7), Wi-Fi 5 (802.11ac), Bluetooth 5.0, FM and GNSS.