Sharkoon intros the TG7M RGB ATX case
Sharkoon describes its new ATX case, namely the TG7M RGB, as "a true all-rounder that meets almost any requirement" by combining attractive looks with excellent hardware support, all for a competitive price.
The Sharkoon TG7M RGB case supports Mini-ITX, Micro-ATX, ATX and EATX mainboards and graphics cards up to 38 cm in length, as well as CPU coolers up to 17.2 cm high. In terms of cooling, the four pre-installed 120 mm RGB PWM fans can be supplemented by three (120 mm) or two (140 mm) additional ones, and the case also supports a radiator up to 360 mm in length instead of the additional fans. The front panel features an air-permeable mesh grille similar to the one employed in the new TG4M RGB case.
The TG7M RGB has two 3.5-inch and four 2.5-inch drive bays, while its front panel features three USB connectors (one USB 3.2 Gen 2 and two USB 3.0) and audio ports.
Sharkoon's TG7M RGB case weighs no less than 7.8 kg (roughly 17.2 lb) and measures 48.5 x 22.0 x 48.8 cm (19.09 x 8.66 x 19.21 in). It can be purchased for a manufacturer's suggested price of 109 Euros (about US$124) from various online and offline retailers.
Sharkoon (official product page)
ATX Case with Optimal Airflow for Efficient Cooling Performance
Pohlheim, 18 January 2022 – Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. Now, with the TG7M RGB, Sharkoon is introducing a PC case that should match up to cases of a higher class. In addition to an air-permeable mesh front panel, the case has four pre-installed 120-millimeter RGB PWM fans. As the first case in the series, a 360-millimeter radiator can be installed not only behind the front panel of the TG7M RGB, but also under the top panel. Graphics cards can be installed vertically in the case using a separately available kit. In addition to two USB 3.0 ports, the I/O panel also has a USB-C 3.2 Gen 2 port.
Built for Convincing Cooling Results
According to the manufacturer, the TG7M RGB is especially designed for efficient cooling: In addition to a mesh grille on the front panel, four 120-millimeter PWM RGB fans have been pre-installed in the case: three at the front and one at the rear of the case. Three fans with an edge-to-edge length of 120 millimeters can also be installed under the top panel. The TG7M RGB is the first case of the TG series where a 360-millimeter radiator can be installed either behind the front panel or under the top panel. Depending on the installed hardware, the size of the mainboard and the height of the RAM, there is at least 5 centimeters of space available under the top panel. Behind the front panel there is space for a radiator with a height of up to 6 centimeters.
Tidy Presentation of Hardware
Like the previous models of the series, the TG7M RGB has a side panel made of tempered glass on the left. To ensure a tidy presentation of the built-in components, the screws of the panel are not directly visible from the outside. The front panel is framed on its left and right by a light-grey metal wing which rounds off the sharp edges of the casing. The cable management inside the case with several cable pass-throughs should ensure an unobstructed view of the installed hardware. By means of an RGB control on the mainboard with a pinout of 5V-D-G or 5V-D-coded-G, the illumination can be personalized as desired. Behind the tempered-glass side panel there is also a power supply tunnel with a window for the constant view of the power supply unit.
Despite its compact design, the TG7M RGB has plenty of space, even for large hardware components. For example, a graphics card 38 centimeters long can also be installed vertically using an optionally available graphics card kit. Power supply units with a length of up to 22 centimeters can be installed in the power supply tunnel on the underside of the case. The case also has space for up to four 2.5-inch and two 3.5-inch data storage drives.
Price and availability.
The TG7M RGB is now available at the manufacturer's suggested price of 109.00 euros.