HiSilicon Kirin 620 vs HiSilicon Kirin 650 vs JLQ JR510

HiSilicon Kirin 620

The HiSilicon Kirin 620 is an ARM-based octa core SoC for mid-range smartphones. It was announced at the end of 2014 and features eight ARM Cortex-A53 cores at 1.2 GHz (max.). Furthermore, the processor integrates a ARM Mali-450 MP4 graphics card, an LPDDR3 memory controller, an LTE Cat.4 modem, 802.11n WiFi and Bluetooth 4.0. The chip is manufactured in 28nm and relatively power efficient.

HiSilicon Kirin 650

The HiSilicon Kirin 650 is an ARM-based octa-core SoC for mid-range smartphones and tablets. It was announced early 2016 and features eight ARM Cortex-A53 cores. Four cores can be clocked with up to 1.7 GHz (power saving cores) and four with up to 2 GHz (performance cores). Furthermore, a ARM Mali-T830 MP2 graphics card (at 600 MHz with 40.8 GFLOPS), a 64-Bit LPDDR3 memory controller and a dual-sim capable LTE Cat. 6 (max. 300 MBit/s and GSM, WCDMA, UMTS, HSPA+) radio are integrated in the SoC.

The processor performance can be compared with the older Kirin 930 and therefore sufficient for daily usage as browsing and non demanding apps. High-end SoCs with Cortex-A57 or A72 cores however should be noticeably faster.

The SoC is produced in a modern 16nm FinFET process and is therefore very power efficient.

JLQ JR510

The JLQ JR510 is a lower mainstream SoC for (Android-based) smartphones and tablets by JLQ, a joint venture with Qualcomm and several Chinese companies.

The JLQ JR510 integrates eight ARM Cortex-A55 cores (similar to the Snapdragon 439) in two Clusters. 4 higher-clocked cores with up to 2 GHz and four power saving cores with up to 1.5 GHz.

The integrated graphics card is not an Adreno, but a ARM Mali G52MP1 (single cluster). Displays can be with resolutions up to 1080p/60Hz, for 720p 90 Hz is possible.

The JR510 also includes an AI accelerator with a theoretical performance of up to 1.23 TOPS. For connectivity, the SoC supports 4G (Cat4 / 7), Wi-Fi 5 (802.11ac), Bluetooth 5.0, FM and GNSS.