Notebookcheck Logo

Amflow UE Carbon Pro: Is this e-bike motor too powerful?

The Amflow UE Carbon (Pro) comes with a powerful motor
The Amflow UE Carbon (Pro) comes with a powerful motor
Amflow has equipped its city e-bike with the powerful Avinox M2 mid-drive motor, raising an obvious question: Can a city e-bike motor actually be too powerful? We put that question to the test.

One thing was immediately clear during our in-depth review of the Amflow UE Carbon Pro: Yes, the Avinox M2 motor is very powerful. While other manufacturers typically rely on lightweight mid-drive units or hub motors for their city e-bikes, the Amflow UE Carbon Pro delivers a rated torque of 125 Nm in boost mode. On paper, that exceeds the torque output of a base VW up! (95 Nm).

Amflow’s reasoning is straightforward: Avinox focuses on powerful mid-drive motors and simply has no milder alternative, such as a hub motor, in its current lineup. That begs the question: Is the Avinox M2 too powerful for a city e-bike, and does that make the bike worse?

Before answering, it helps to reframe the question. An e-bike motor is not inherently too powerful, but it can deliver power too abruptly in certain situations. What matters most is not how much peak power the motor can produce, but how controllably it delivers that power when needed. On that front, the Amflow UE Carbon Pro gave me no cause for concern. While the Avinox M2 can provide massive assistance, it is equally capable of delivering a gentle push. Riders also have plenty of options to fine-tune individual assist levels or configure custom profiles. During testing, I also took the Amflow UE Carbon Pro off-road. Even with strong assistance over tricky terrain and tires that are not particularly grippy, I never lost traction—though I still plan to test it again once conditions get slippery.

The Avinox M2 motor is clearly visible and prioritizes torque over compactness
The Avinox M2 motor is clearly visible and prioritizes torque over compactness

The M2’s second potential drawback is weight. The mid-drive motor weighs around 2.59 kg (5.71 lbs), whereas a less powerful hub motor suited for a city e-bike, such as the Bosch Hub Line, is slightly lighter at 2.3 kg (5.07 lbs). Since our fully equipped test bike weighed 26.5 kg (58.4 lbs)—while Amflow lists the base model at 20.9 kg (46.1 lbs) without accessories—that extra weight amounts to roughly 1.1 percent, a negligible difference. The mid-drive layout also benefits the bike’s center of gravity: while the motor sits no lower than the rear axle, positioning it closer to the middle shifts the center of gravity closer to the center along the bike’s length.

A third potential drawback concerns the components, though it barely matters in practice: a powerful mid-drive motor limits gearing choices. However, the electronic three-speed internally geared hub on the Amflow UE Carbon Pro pairs well with the Gates carbon belt, making this a non-issue here. Ultimately, while Amflow may have had little choice but to use a powerful mid-drive motor, it has not made the bike any worse as a city e-bike. As I have noted before, viewing the Amflow UE Carbon Pro purely as a city bike is rather limiting—in fact, it is this very motor that makes off-road riding possible.

You can fine-tune the motor assistance
ⓘ Notebookcheck
You can fine-tune the motor assistance
You can also adjust overrun: how long the motor keeps assisting after you stop pedaling
ⓘ Notebookcheck
You can also adjust overrun: how long the motor keeps assisting after you stop pedaling
You can also set a target heart rate to control the motor assistance
ⓘ Notebookcheck
You can also set a target heart rate to control the motor assistance
Google LogoAdd as a preferred source on Google
Mail Logo
static version load dynamic
Loading Comments
> Expert reviews and news on laptops, smartphones and tech innovations > News > News Archive > Newsarchive 2026 11 > Amflow UE Carbon Pro: Is this e-bike motor too powerful?
Silvio Werner, 2026-11-22 (Update: 2026-11-22)