Qualcomm Snapdragon 801 MSM8974AC vs HiSilicon Kirin 930 vs Qualcomm Snapdragon 801 MSM8974AB

Qualcomm Snapdragon 801 MSM8974AC

The Qualcomm Snapdragon 801 MSM8974AC is an ARM-based SoC for tablets and smartphones. It is built at TSMC in a 28nm HPM (High Performance Mobile) HKMG process and includes 4 Krait 400 cores at up to 2.45 GHz and a Adreno 330 at up to 578 MHz. Compared to the Snapdragon 800 chips like the MS8974AB, the 801 offers a higher clock rate for GPU and CPU and support for eMMC 5.0.

Processor 

The CPU portion is based on Qualcomm's Krait architecture, which is compatible with the ARMv7 ISA. Compared to the Snapdragon 600 (Krait 300), the new Krait 400 cores of the Snapdragon 801 have been tweaked just slightly with faster L2 cache. Thanks to a clock rate of up to 2.45 GHz and a high performance per MHz somewhere between an ARM Cortex-A9 and a Cortex-A15, the Snapdragon 801 offers very strong CPU performance. The S801 competes with the Nvidia Tegra 4, Samsung Exynos 5420 and Apple A7 and is therefore one of the fastest ARM SoCs on the market in the beginning of 2014 (till the Snapdragon 805 arrives).

Graphics

Another difference between the Snapdragon 600 and 800/801 is the graphics unit. While the S600 implements an Adreno 320 (400 to 450 MHz), the S800 and S801 features the faster Adreno 330 (MSM8974AC: 578 MHz). Both GPUs offer the same amount of texture units (8 TMUs), but the Adreno 330 has 50 percent more shaders (probably 6x SIMD16 vs. 4x SIMD16 of the previous generation). In conjunction with the higher memory bandwidth, the performance is significantly better. As a result, the Adreno 330 is slightly faster than the Mali-T628 (Exynos 5420) and comparable to the PowerVR G6430 (Apple A7). Depending on the device and cooling, however, the performance may vary. The GPU supports OpenGL ES 3.0 as well as OpenCL 1.2.

Features 

Furthermore, the MSM8974AC supports many wireless technologies: Bluetooth 4.0, WLAN, IEEE 802.11a/b/g/n/ac (2.4/5 GHz), GSM (GPRS, EDGE), W-CDMA/UMTS (HSDPA, HSUPA, HSPA+, cat.29 DC-HSPA+), MBMS, cat.4 LTE, CDMA2000 (1X RTT, 1 × EV-DO Rel.0/Rev.A/Rev.B, 1× EV-DO Rev.A MC, 1× Adv Rev.A/Rev.B) and TD-SCDMA. Futhermore the Snapdragon S801 supports Dual SIM Dual Active (DSDA) as the Snapdragon S800 MSM8974AB.

The MSM8974AC can encode and play UHD 4K videos in 3840x2160 at 30 FPS (120 Mbps H.264 High Profile) simultaneously via dedicated hardware. Moreover, it supports both USB 2.0 and 3.0 and cameras up to 55 megapixels and stereoscopic 3D.

Power Consumption

Thanks to the new 28nm HPM HKMG process, the energy efficiency has been improved significantly compared to its LP 28nm S600 predecessor. Depending on the field of application, the maximum power consumption should be about 3 W for smartphones or 4 W or greater for tablets. This should be similar to comparable ARM SoCs currently in the market. However, the MSM8974AC will likely need a little more power than the slightly lower clocked MSM8974.

HiSilicon Kirin 930

The HiSilicon Kirin 930 is an ARM-based octa-core SoC (system-on-a-chip) for smartphones and tablets. It was launched in the first half of 2015. It integrates two quad-core clusters of Cortex-A53 cores (big.LITTLE). The performance cluster clocks at up to 2 GHz, the power saving cluster at up to 1.5 GHz. Furthermore, the SoC integrates a ARM Mali-T628 MP4 graphics card and LTE Cat. 6 modem. The SoC is manufactured in 28nm and thanks to the small Cortex-A53 cores also suited for smaller smartphones.

Qualcomm Snapdragon 801 MSM8974AB

The Qualcomm Snapdragon 801 MSM8974AB is an ARM-based SoC for tablets and smartphones. It is built at TSMC in a 28nm HPM (High Performance Mobile) HKMG process, whereas the Snapdragon 600 was manufactured in 28nm LP. In addition to 4 CPU cores with a clock speed of up to 2.36 GHz, the chip also integrates an Adreno 330 GPU up to 578 MHz, an LPDDR3-1866 memory controller and various radio modules (UMTS/LTE, WiFi, Bluetooth, GPS). The slightly higher CPU/GPU clocks and faster memory support are the key differences to the Snapdragon 800 MSM8974.

Processor 

The CPU portion is based on Qualcomm's Krait architecture, which is compatible with the ARMv7 ISA. Compared to the Snapdragon 600 (Krait 300), the new Krait 400 cores of the Snapdragon 800/801 have been tweaked just slightly with faster L2 cache. Thanks to a clock rate of up to 2.36 GHz and a high performance per MHz somewhere between an ARM Cortex-A9 and a Cortex-A15, the Snapdragon 801 offers very strong CPU performance. The S801 competes with the Nvidia Tegra 4, Samsung Exynos 5420 and Apple A7 and is therefore one of the fastest ARM SoCs on the market as of 2013.

Graphics

Another difference between the Snapdragon 600 and 800/801 is the graphics unit. While the S600 implements an Adreno 320 (400 to 450 MHz), the S800 /S801 feature the faster Adreno 330 (MSM8974AB: 578 MHz). Both GPUs offer the same amount of texture units (8 TMUs), but the Adreno 330 has 50 percent more shaders (probably 6x SIMD16 vs. 4x SIMD16 of the previous generation). In conjunction with the higher memory bandwidth, the performance is significantly better. As a result, the Adreno 330 is slightly faster than the Mali-T628 (Exynos 5420) and the PowerVR G6430 (Apple A7). Depending on the device and cooling, however, the performance may vary. The GPU supports OpenGL ES 3.0 as well as OpenCL 1.2.

Features 

Furthermore, the MSM8974AB supports many wireless technologies: Bluetooth 4.0, WLAN, IEEE 802.11a/b/g/n/ac (2.4/5 GHz), GSM (GPRS, EDGE), W-CDMA/UMTS (HSDPA, HSUPA, HSPA+, cat.29 DC-HSPA+), MBMS, cat.4 LTE, CDMA2000 (1X RTT, 1 × EV-DO Rel.0/Rev.A/Rev.B, 1× EV-DO Rev.A MC, 1× Adv Rev.A/Rev.B) and TD-SCDMA. 

The MSM8974AB can encode and play UHD 4K videos in 3840x2160 at 30 FPS (120 Mbps H.264 High Profile) simultaneously via dedicated hardware. Moreover, it supports both USB 2.0 and 3.0 and cameras up to 55 megapixels and stereoscopic 3D.

Power Consumption

Thanks to the new 28nm HPM HKMG process, the energy efficiency has been improved significantly compared to its LP 28nm S600 predecessor. Depending on the field of application, the maximum power consumption should be about 3 W for smartphones or 4 W or greater for tablets. This should be similar to comparable ARM SoCs currently in the market. However, the MSM8974AB will likely to need a little more power than the slightly lower clocked MSM8974.