EBC77: Single-board computer sports PCIe and was developed in collaboration with Canonical
The EBC77 supports Linux (Image source: Eswin)
The EBC77 is a new single-board computer that can be used with various sensors and actuators and sports an NPU for AI applications. However, there’s an obvious difference compared to the Raspberry Pi.
Eswin and Canonical have launched a new single-board computer. The EBC77 sports an EIC7700X SoC, which is based on the RISC-V instead of the more common ARM architecture that's the foundation of the Raspberry Pi 5 and many other products in this segment. The SBC supports LPDDR5 RAM and comes with an 8MB SPI NOR flash. Like many single-board computers, this model lacks integrated mass storage. Therefore, the operating system should be stored on a microSD card. Alternatively, the Eswin EBC77 can be upgraded with an SSD. Like the Raspberry Pi 5, the little computer supports PCIe 3 with a single lane.
The EIC7700X SoC further features an NPU, which is specifically designed to accelerate AI applications at up to 20 TOPS. For video output, the SBC relies on HDMI and MIPI DSI, while cameras can be connected via MIPI CSI or USB. Additionally, there are two USB 3.2 Gen 1 and two USB 2.0 ports. One Gigabit Ethernet port is available as well, as is Wi-Fi 802.11 ac on the 2.4 and 5GHz bands. Sensors and actuators can be connected via the usual 40-pin header. In the US, Eswin’s latest single-board computer is officially priced at $149 on Amazon.
Editor of the original article:Silvio Werner - Senior Tech Writer - 14593 articles published on Notebookcheck since 2017
I have been active as a journalist for over 10 years, most of it in the field of technology. I worked for Tom’s Hardware and ComputerBase, among others, and have been working for Notebookcheck since 2017. My current focus is particularly on mini PCs and single-board computers such as the Raspberry Pi – so in other words, compact systems with a lot of potential. In addition, I have a soft spot for all kinds of wearables, especially smartwatches. My main profession is as a laboratory engineer, which is why neither scientific contexts nor the interpretation of complex measurements are foreign to me.
Translator:Enrico Frahn - Managing Editor Accessory Reviews, Tech Writer - 4936 articles published on Notebookcheck since 2021
My fascination for technology goes back a long way to the Pentium II era. Modding, overclocking and treasuring computer hardware has since become an integral part of my life. As a student, I further developed a keen interest in mobile technologies that can make the stressful college life so much easier. After I fell in love with the creation of digital content while working in a marketing position, I now scour the web to bring you the most exciting topics in the world of tech. Outside the office, I’m particularly passionate about motorsports and mountain biking.