Qualcomm Snapdragon 8+ Gen 1 vs Qualcomm Snapdragon 778G+ 5G vs Qualcomm QCM6490

Qualcomm Snapdragon 8+ Gen 1

The Qualcomm Snapdragon 8+ Gen 1 Mobile Platform is a high-end SoC for smartphones that was introduced in mid 2022 and manufactured in 4 nm at TSMC. It integrates one “Prime Core” based on a ARM Cortex-X2 architecture clocked at up to 3.2 GHz. Three more performance cores are based on the Cortex-A710 but clocked up to 2.5 GHz. Furthermore, four energy saving cores are integrated that are based on the ARM Cortex-A510 architecture and clocked at up to 1.8 GHz. All cores can use the shared 6 MB level 3 cache.

Compared to the Snapdragon 8 Gen 1, the SoC is now produced in the more power efficient 4nm process at TSMC and offers higher clocked CPU and GPU cores (at a lower power consumption according to Qualcomm).

The integrated AI Engine can offer up to 4x faster AI performance thanks to the bigger Tensor engine. The 18-Bit-Spectra-ISP also saw some big improvements and is now called Snapdragon Sight.

The integrated Adreno 730 offers a 30% graphics boost compared to the previous Adreno 660.

The integrated Snapdragon X65 5G modem is also new and offers faster transfer rates (up to 10 Gbps download and 3 Gbps upload). The FastConnect 6900 offers support for the current Wifi 6E and Bluetooth 5.2.

Qualcomm Snapdragon 778G+ 5G

The Qualcomm Snapdragon 778G+ 5G (SDM778G Plus 5G Mobile Platform) is a fast mid-range ARM-based SoC largely found on Android tablets and smartphones. It integrates eight cores (octa-core) divided into two clusters. A fast performance cluster with four cores based on the ARM Cortex-A78 architecture with up to 2.5 GHz and a power efficiency cluster with four small ARM Cortex-A55 cores at up to 1.9 GHz. Depending on the workload only single clusters or all cores can run at different clock speeds. Compared to the older non-plus variant, the 778G+ offers 100 MHz higher clocked CPU cores.

Thanks to the new Cortex-A78 cores, the CPU performance increases by up to 40% compared to the old Snapdragon 768G according to Qualcomm. In our benchmarks, the 778G+ is able to reach the performance of the old high end chip Kirin 990. 

The integrated X53 5G modem supports up to 3.3 Gbps with sub 6Ghz. The FastConnect 6900 Wi-Fi modem supports the current Wi-Fi 6e standard with 6GHz.

The integrated Qualcomm Adreno 642L offers a 40% higher performance compared to the old Adreno 620 in the predecessor. This is partly thanks to the fast memory controller with LPDDR5-3200 support.

The integrated 6th gen AI engine called Hexagon 770 offers a 2x improvement and up to 12 TOPS of performance. The Spectra 570 ISP (image signal processor) supports up to three cameras. The satellite system supports all major standards like Beidou, Galileo, GLONASS and GPS.

The G specifies an optimized SoC for gaming and e.g. Qualcomm offers updates for the graphics driver.

The Snapdragon 778G Plus is manufactured in the modern 6 nm process at TSMC (vs the 5LPE of the 780G).

Qualcomm QCM6490

The Qualcomm QCM6490 is an upper mid-range SoC and is based on the Snapdragon 778G, but this variant is an extended-life chipset. The QCM6490 is being used for the first time in the Android smartphone Fairphone 5, but has actually been designed for corporate use and IoT applications.

The Kyro 670 CPU consists of a total of eight cores, which are divided into three clusters. The first cluster consists of just one high-performance core (Kyro Gold Plus, Cortex-A78), which operates at up to 2.71 GHz. The second cluster contains three further Cortex-A78 cores (Kyro Gold), each clocking at up to 2.40 GHz. The remaining four power-saving cores (Kyro Silver, Cortex-A55) are located in the last cluster and operate at up to 1.96 GHz. For the graphics calculations, an Adreno 643 with 812 MHz is integrated.

The QCM6490 SoC has an integrated 5G modem that supports both 5G-Sub6 and 5G-mmWave. In theory, this enables data rates of up to 3.7 Gbit/s downlink and 2.5 Gbit/s upload. Wi-Fi 6E is also on board, which supports the 6 GHz band.

The SoC is manufactured using the 6 nm process.