Apple A6 vs Qualcomm Snapdragon 400 APQ8028 vs Qualcomm Snapdragon S4 Pro MSM8960T

Apple A6

The Apple A6 is a dual-core SoC found in the iPhone 5 with ARM compatible CPU cores. The A6 was developed by Apple and supports the extended ARMv7s instruction set. The clock rate of the CPU is between 800 to 1200 MHz depending on the CPU load. The integrated GPU is a PowerVR SGX543MP3 at 266 MHz.

Qualcomm Snapdragon 400 APQ8028

The Qualcomm Snapdragon 400 APQ8028 is an entry-level ARM-SoC for Android smartphones and tablets. It offers four Cortex-A7 cores clocked at up to 1.6 GHz (Quad-Core) as well as an Adreno 305 graphics card at 450 MHz. The chip is manufactured in 28 nm LP at TSMC.

Qualcomm Snapdragon S4 Pro MSM8960T

The Qualcomm MSM8960T (Snapdragon S4 Pro) is a fast ARM SoC, which is mainly used in smartphones. It integrates a Krait-based dual-core processor and an Adreno 320 graphics card. Furthermore it features an integrated LPDDR2 memory controller (dual channel, max. 500 MHz) as well as various radio standards including LTE. The chip is fabricated at TSMC in a 28nm LP process.

Unlike older Qualcomm SoCs, which are still based on slower Scorpion cores, the MSM8960T uses the modern Krait architecture. The Krait design is significantly faster than the Cortex-A5, Cortex-A7 and Cortex-A9 architecture from ARM and just behind the high-end Cortex-A15. The two cores are clocked at 1.7 GHz and offer a performance, which is even above some older quad-cores like Nvidia's Tegra 3 or the Samsung Exynos 4412.

The Adreno 320 graphics card is the same as found in the Snapdragon 600 and one of the fastest mobile GPUs in mid-2013. The GPU is clocked at 400 MHz and offers enough performance for demanding games and high resolution screens.

Since the MSM8960T only has two CPU cores, the power consumption should be somewhat below quad-cores like the Snapdragon 600. The chip can therefore be used in compact smartphones with a smaller battery.