Intel Core i7-7Y75 vs Intel Xeon E3-1535M v6
Intel Core i7-7Y75► remove from comparison
The Intel Core i7-7Y75 is a very efficient dual-core SoC for tablets and passively cooled notebooks based on the Kaby Lake architecture and was announced in the end of August 2016. The CPU consists of two processor cores clocked at 1.3-3.6 GHz (2-core Turbo not specified yet). Thanks to Hyper Threading, the processor can execute up to four threads simultaneously. The chips also includes the Intel HD Graphics 615 GPU, a dual-channel memory controller (DDR3L/LPDDR3) as well as VP9 and H.265 video de- and encoder. It is still produced in a 14 nm process with FinFET transistors.
Intel basically used the familiar micro architecture from the Skylake generation, so the per-MHz performance is identical. Only the Speed-Shift technology for faster dynamic adjustments of the voltages and clocks was improved, and the matured 14 nm process now also enables much higher frequencies and better efficiency than before.
Despite the changed designation, the Core i7-7Y75 is the successor to the Core m7-6Y75 (Skylake Y-series), so the chip does not reach the performance level of other Core i processors due to the lower TDP. Thanks to its high Turbo clock, the 7Y75 can sometimes keep up with the 15 Watt models for short peak load and single-thread scenarios, but the clocks will drop significantly under sustained workloads. The CPU is still suitable for many more demanding applications as well as multitasking.
The integrated Intel HD Graphics 615 GPU has 24 Execution Units (EUs) like the old HD Graphics 515 and runs with clocks between 300 and 1050 MHz in combination with this processor. The performance heavily depends on the TDP limit as well as the memory configuration; with fast LPDDR3-1866 RAM in dual-channel mode, the GPU should sometimes be able to compete with the HD Graphics 520, but can also be much slower in other scenarios. Modern games from 2016 will, if at all, only run smoothly in the lowest settings.
Contrary to Skylake, Kaby Lake now also supports hardware decoding for H.265/HEVC Main10 with a 10-bit color depth as well as Google's VP9 codec.
The chip is manufactured in an improved 14 nm process with FinFET transistors, so the power efficiency was once again improved significantly. The typical TDP for the Y-series is specified at 4.5 Watts, and can be adjusted in both directions depending on the usage scenario.
Intel Xeon E3-1535M v6► remove from comparison
The Intel Xeon E3-1535M v6 is a fast quad-core processor for workstation notebooks based on the Kaby Lake architecture and was announced in January 2017. It is the top model of the mobile Kaby-Lake-H series at the time of the announcement. Besides four cores including Hyper-Threading support running at 3.1 - 4.2 GHz (4 cores up to 3.9 GHz, 2 cores up to 4.1 GHz), the processor is also equipped with the professional HD Graphics P630 GPU as well as a dual-channel memory controller (DDR3L-1600/DDR4-2400). It is manufactured in a 14nm process with FinFET transistors.
Intel basically uses the same micro architecture compared to Skylake, so the per-MHz performance does not differ. The manufacturer only reworked the Speed Shift technology for faster dynamic adjustments of voltages and clocks, and the improved 14nm process allows much higher frequencies combined with better efficiency than before.
The performance is a bit higher compared to the fastest Kaby Lake consumer CPU, the Intel Core i7-7920HQ, thanks to slightly higher Turbo clocks (100 - 200 MHz), so it is the fastest mobile consumer processor in the beginning of 2017. The performance is sufficient even for very demanding tasks and on par with powerful desktop quad-core processors.
The integrated professional Intel HD Graphics P630 has 24 Execution Units (similar to previous HD Graphics 530) running at 350 - 1100 MHz. The performance depends a lot on the memory configuration; it should be comparable to a dedicated Nvidia GeForce 920M in combination with fast DDR4-2133 dual-channel memory. It offers certified drivers for 15 professional and CAD applications.
Contrary to Skylake, Kaby Lake now supports hardware decoding for H.265/HEVC Main 10 with a 10-bit color depth as well as Google's VP9 codec. The dual-core Kaby Lake processors, which were announced in January, should also support HDCP 2.2.
The chip is manufactured in an improved 14nm process with FinFET transistors, which improves the efficiency even further. Intel still specifies the TDP with 45 Watts, but it can also be reduced to 35 Watts by the notebook manufacturers (cTDP down). This will obviously affect the performance, because the Turbo Boost cannot be maintained for longer periods.
|Model||Intel Core i7-7Y75||Intel Xeon E3-1535M v6|
|Series||Intel Kaby Lake||Intel Kaby Lake|
|Codename||Kaby Lake||Kaby Lake|
|Series: Kaby Lake Kaby Lake|
|Clock||1300 - 3600 MHz||3100 - 4200 MHz|
|L1 Cache||128 KB||256 KB|
|L2 Cache||512 KB||1 MB|
|L3 Cache||4 MB||8 MB|
|Cores / Threads||2 / 4||4 / 8|
|TDP||4.5 Watt||45 Watt|
|Technology||14 nm||14 nm|
|max. Temp.||100 °C||100 °C|
|Features||Dual-Channel DDR3L-1600/LPDDR3-1866 Memory Controller, HyperThreading, AVX, AVX2, Quick Sync, Virtualization, AES-NI, vPro, TXT||Dual-Channel DDR4 Memory Controller, HyperThreading, AVX, AVX2, Quick Sync, Virtualization, AES-NI, SIPP, vPro, TXT|
|iGPU||Intel HD Graphics 615 (300 - 1050 MHz)||Intel HD Graphics P630 (300 - 1150 MHz)|
|$393 U.S.||$623 U.S.|
|Manufacturer||Intel Kaby Lake i7-7Y75|