Intel Core i7-10700 vs Intel Core i3-10320 vs Intel Core i3-10100F

Intel Core i7-10700

The Intel Core i7-10700 is a high-end desktop CPU based on the Comet Lake architecture. The CPU offers 8 cores and 16 threads clocked at 2.9 - 4.8 GHz. All cores can run at up to 4.6 GHz.

Compared to the older Core i7-9700, the 10700 now enables HyperThreading and therefore in some applications a nice performance boost. The single core performance is quite similar.

The chip is manufactured in 14nm++ process at Intel. The TDP is rated at 65 Watt (PL1) but the PL2 is set to 224 Watt for short term boosts (up to 28 seconds).

Intel Core i3-10320

The Intel Core i3-10320 is an entry level quad-core desktop processor based on the Comet Lake-S architecture (CML-S, 4th generation of Skylake). The processor clocks at between 3.8 and 4.6 GHz and can execute up to eight threads with its four cores simultaneously thanks to Hyper-Threading. 

The processor is still manufactured in the old 14nm (14nm++) process. Thanks to the free multiplicator, the CPU can also be easily overclocked (but may not have much headroom).

The Comet Lake architecture is similar to Coffee Lake and offers the same features and is produced in the same 14nm process. Other than the improved clock rates, the memory controller now also supports faster DDR4-2933 RAM. More information on Comet Lake and all the models and articles on it can be found here.

Performance

The performance is similar to the old high end Intel Core i7-7700K due to the same architecture and similar clock speeds. 

Graphics

The integrated Intel UHD Graphics 630 iGPU is supposed to offer a similar performance as the UHD630 in the Core i7-9900K. As a  low-end solution it will only run current games smoothly at reduced details - if at all.

Power Consumption

Intel specifies the TDP with 65 Watts (PL1) but under full load up to 90 Watt are consumed (PL2 for 28s).

Intel Core i3-10100F

The Intel Core i3-10100F is an entry level quad-core processor for desktop PCs based on the Comet Lake-S architecture. It offers four cores clocked at 3.6 - 4.3 GHz with HyperThreading / SMT support (8 threads). The CPU is still manufactured in 14nm++ and does not feature an integrated graphics card. Compared to the older Coffee Lake Core i3-9100F, the i3-10100F offers a 100 MHz higher Boost speed, HyperThreading and support for faster DDR4 memory (2666 MHz).

The performance should be similar to the older i3-9100F and therefore situated in the lower end of desktop processors. That means it offers enough performance for office tasks and low end gaming.

Intel specifies the CPU with a TDP of 65 Watt. For desktops that means that the processor won't need big cooling solutions and can be used in small cases.