The AMD Radeon RX Vega 2 is an integrated GPU for laptops. It is used for the entry level Athlon Silver 3050U APUs, which were launched in early 2020. The GPU is based on the Vega architecture (5th generation GCN) and has 2 CUs (= 128 of the 704 shaders) clocked at up to 1100 MHz. The performance depends on the configured TDP (12-25 W at launch), the clocks, the cooling, and the memory configuration). The GPU should benefit from fast dual-channel DDR4-2400 RAM (contrary to DDR4-2133 single-channel, which is also possible).
The Vega architecture offers some improvements over the Polaris generation and now supports DirectX 12 Feature Level 12_1. More information is available in our dedicated article about the Raven Ridge architecture.
The performance should be clearly lower than the Radeon RX Vega 3 with 3 CUs and therefore in the lowest performance region of modern GPUs. That means, demanding current games may not be playable fluently.
Thanks to the 12nm process and clever power-saving features, the power consumption is comparatively low (according to AMD), so the graphics card can also be used for slim and light notebooks.
AMD’s Radeon RX Vega 56 is a high-end desktop GPU that was first introduced in August of 2017. It is based on the Vega architecture (Vega 10) and equipped with fast HBM2 VRAM. When it was first introduced, it was the second fastest AMD GPU available, only bested by the RX Vega 64 that launched on the very same day. At the time of writing, both GPUs have been replaced by their respective Radeon VII successors.
The RX Vega 56 reference design features 56 CUs running at 1,138-1,474 MHz (Boost) and 8 GB of HBM2 VRAM running at 800 MHz connected via a 2,048-bit memory bus resulting in a memory bandwidth of 409.6 GB/s.
Vega 10 is still produced in a 10-nm manufacturing process. The die consists of roughly 12.5 billion transistors and measures 495 mm2 in size. The newer Vega 20 chip, which AMD’s current Radeon VII is based on, features around 13.2 billion transistors. Applications have access to a total of 3,584 shaders, but the GPU lacks the dedicated Raytracing and Tensor cores that can be found on Nvidia’s latest RTX generation of GPUs.
Performance-wise, the RX Vega 56 is comparable to an Nvidia GeForce GTX 1070, and thus best categorized as upper middle-class. Games released in 2018 and 2019 should run perfectly fine and smooth in high details on WQHD (2560 x 1440).
According to AMD, the RX Vega 56’s maximum power consumption is 210 W. Given the GTX 1070’s power consumption of just 150 W, the Vega 56 cannot keep up with its direct competitor in regards to performance-per-watt ratio.
- Range of benchmark values for this graphics card - Average benchmark values for this graphics card * Smaller numbers mean a higher performance 1 This benchmark is not used for the average calculation
The following benchmarks stem from our benchmarks of review laptops. The performance depends on the used graphics memory, clock rate, processor, system settings, drivers, and operating systems. So the results don't have to be representative for all laptops with this GPU. For detailed information on the benchmark results, click on the fps number.