NVIDIA Quadro P3000 vs NVIDIA Quadro P620

NVIDIA Quadro P3000

The Nvidia Quadro P3000 is a mobile high-end workstation graphics card for notebooks. Similar to the consumer GeForce GTX 1060 (Laptop), it is based on the GP106 chip with 1280 shaders. The graphics card is designed for the Kaby Lake generation and is the successor to the Quadro M3000M (Maxwell). However, the P3000 is equipped with 6 GB GDDR5 video memory (at a lower bandwidth), while GTX 1060 is available with 3 or 6 GB. The clock rates range from 1088 MHz (base) to 1215 MHz (typical Boost) to 1240 MHz (max.).

The Quadro GPUs offer certified drivers, which are optimized for stability and performance in professional applications (CAD, DCC, medical, prospection, and visualizing applications). The performance in these areas is therefore much better compared to corresponding consumer GPUs.

Performance

The theoretical performance should be on par with the GTX 1060 (if the clocks did not take a massive hit), so the GPU should be significantly faster than the previous M3000M.

Power Consumption

The power consumption of the Quadro P3000 is 75 Watts TGP (including memory) or 55.3 W TDP according to Nvidia, so the card is suited for 15-inch notebooks or larger.

NVIDIA Quadro P620

The Nvidia Quadro P620 is an entry-level mobile workstation graphics card for laptops. It uses a GP107 Pascal chip with a 128 Bit memory bus and therefore similar to the old Quadro P1000 with reduced clock speeds. Compared to consumer cards, there is no similar specified card currently and therefore the P620 slots in between the GeForce MX250 and GTX 1050. With a theoretical peak of 1.5 TFLOPS, the performance is clearly ahead of the old P600 with 1.2 TFLOPS.

The Quadro GPUs offer certified drivers, which are optimized for stability and performance in professional applications (CAD, DCC, medical, prospection, and visualizing applications). The performance in these areas is therefore much better compared to corresponding consumer GPUs.