The 28nm NVIDIA Quadro M600M is an entry-level DirectX 12 (FL 11_0) and OpenGL 4.5-compatible graphics card for mobile workstations. It is a 1st generation Maxwell GPU that is most likely built on the GM107 architecture with 384 of the 640 shader cores activated. Compared to the older Quadro K620M and consumer GeForce 940M, the GPU offers a 128-Bit memory bus that separates it from the GM108-based K620M. The M600M typically comes with 2 GB GDDR5 VRAM clocked at 1250 MHz (5000 MHz effective at 80 GB/s instead of 16 GB/s on the K620M).
In the Lenovo Thinkpad P70 the M600M is clocked at 837 - 876 MHz (Boost) for the shaders, and 1253 MHz (5012 MHz effektive) for the 2 GB GDDR5 from Samsung (thanks to our reader John for the GPU-Z screenshot).
The Quadro series offers certified drivers that are optimized for stability and performance in professional applications like CAD or DCC. OpenGL performance, for example, should be significantly better compared to GeForce graphics cards of similar specifications.
The Quadro M600M is about 20% faster than the previous Quadro K620M thanks to the wider 128-bit memory interface and pretty much right between the siblings Quadro M500M & Quadro M1000M. The consumer GPU GeForce 940MX is beaten by ~10-15%, while the GeForce GTX 950M is another 20% faster.
Using CUDA (Compute Capability 5.0) or OpenCL 1.2, the cores of the Quadro M600M can be used for general calculations.
The power consumption of the Quadro M600M is rated at the same 30 Watt TGP as the K620M including the board and memory components. Therefore, the card is also suited for thin and light notebooks.
The NVIDIA Quadro 2000M is a professional workstation graphics card based on the Fermi architecture (likely the GF104 or GF106). It offers the same amount of shaders like the GeForce GTX 460M, but only a 128 Bit memory bus for DDR3 memory. The slow DDR3 memory in particular could be a bottleneck to the GPU
The Quadro series offers certified drivers that are optimized for stability and performance in professional applications like CAD, DCC, medicine, or visualisation areas. OpenGL performance, for example, should be significantly better than GeForce graphics cards of similar specifications.
The shader/CUDA cores can be accessed using DirectX 11 or OpenGL 4.1 for graphics rendering and DirectCompute, OpenCL, AXE, and CUDA for general purpose calculations. Due to the new Fermi core, the 2000M should offer high performance in general purpose calculations.
Furthermore, the Nvidia Quadro 2000M is compatible with the new stereoscopic solution by Nvidia, NVIDIA 3D Vision Pro.
To automatically switch between the processor graphics card and the Quadro, the 2000M supports Nvidia Optimus. The implementation of the technology into specific notebook models is dependent on the laptop vendor.
The Quadro 2000M is specified at 55 Watt TDP and is therefore best suited for 15.6" or greater laptops.
- Range of benchmark values for this graphics card - Average benchmark values for this graphics card * Smaller numbers mean a higher performance 1 This benchmark is not used for the average calculation
The following benchmarks stem from our benchmarks of review laptops. The performance depends on the used graphics memory, clock rate, processor, system settings, drivers, and operating systems. So the results don't have to be representative for all laptops with this GPU. For detailed information on the benchmark results, click on the fps number.