NVIDIA Quadro FX 3600M vs NVIDIA Quadro FX 380M vs NVIDIA Quadro FX 2800M
NVIDIA Quadro FX 3600M► remove
The NVIDIA Quadro FX 3600M is a professional graphics card for CAD, DCC and other modeling applications based upon the 8800M GTX consumer card (G92 architecture). It was a high-end card at the time of announcement. Certified drivers grant error-free and faster performance in professional applications. The FX 3600M was later succeeded by the more efficient 55nm FX 2800M and FX 3800M, both of which still utilize the G92 architecture.
The most important aspect of the Quadro FX 3600M is its use "Unified Shaders". There no longer exist any dedicated pixel or vertex shaders. Instead, the FX 3600M uses 64 so-called stream processors to handle most of the graphics work previously processed by pixel and vertex shaders. Furthermore, the shader units are clocked higher than the GPU core (1250 MHz).
The performance of the FX 3600M shoul be higher than the 1600M due to the 256 bit wide memory bus and the high number of Unified Shaders. According to Nvidia, the GPU is best suited for modelling large 3D scenes and complex models.
NVIDIA Quadro FX 380M► remove
The Nvidia Quadro FX 380M is a professional entry-level graphics card for mobile workstations. It is based on the GeForce 310M and therefore the 3D performance is not very good. Due to special drivers and optimizations, the performance for professional applications should be much better (than the 310M would perform). Another advantage are the certified drivers than ensure a good performance of professional applications without errors.
The card supports DirectX 10.1 and all the features of the G 310M (as it is based on the same GT218 core). Therefore PureVideo HD to decode HD videos with the graphics card is supported. The used Video Processor 4 (VP4) is able to fully decode H.264, VC-1, MPEG-2, and also MPEG-4 ASP (DivX or xVID) in hardware to minimize CPU load. MPEG-1 is not supported but can be easily handled by every modern CPU.
The gaming performance of the FX380M is similar to the GeForce 310M and therefore located in the entry level class. The professional drivers are however optimized for applications and may therefore deliver a worse performance. Modern 3D games like COD Modern Warfare 2 run only in low details and resolutions fluently. Some demanding games like NFS Shift or GTA4 wont run fluently at all. Less demanding games like SIMS 3 run in medium details and resolutions fluently. Therefore, the graphics card can not be recommended for gamers.
As the FX380M supports CUDA, DirectX Compute 10.1, and OpenCL, the shaders of the graphics processor can be used for other tasks than rendering images (e.g. faster encoding of videos).
The used GT218 core is manufactured in 40nm and based on the desktop GTX 200 architecture.
NVIDIA Quadro FX 2800M► remove
The NVIDIA Quadro FX 2800M is a mobile workstation graphics card for high-end laptops. It is based on the Geforce 9800M GT / G92 core but features a higher clock rate and is produced in a 55nm fabrication process versus 65nm of the 9800M GT.
The Quadro FX series of cards are optimized for professional applications like CAD or DCC. OpenGL performance especially should be noticeably better compared to consumer GeForce cards.
The Quadro FX2800M is found in mobile workstations like the Dell M6500 and supports DirectX 10.0 and OpenGL 2.1. In the Dell laptops, the card is able to output up to two displays simultaneously (DisplayPort up to 2560x1600, DVI/HDMI up to 1920x1200). Dell claims a thermal power draw of 65 Watts while Nvidia rates the GPU at 75 Watt TDP.
Due to the relatively high power consumption of 65 to 75 Watts (TDP) and a 10 Watt idle mode, the Quadro FX 2800M is normally only foud in medium to large laptops with powerful cooling solutions.
|NVIDIA Quadro FX 3600M||NVIDIA Quadro FX 380M||NVIDIA Quadro FX 2800M|
|Quadro FX Series|
|96 -||16 -||96 -|
|Core||500 MHz||625 MHz||600 MHz|
|Shader||1250 MHz||1530 MHz||1500 MHz|
|Memory||800 MHz||800 MHz||1000 MHz|
|Bus||256 Bit||64 Bit||256 Bit|
|Max. Memory||512 MB||512 MB||1024 MB|
|DirectX||DirectX 10, 4.0||DirectX 10.1, 4.1||DirectX 10, 4.0|
|Transistors||754 Million||260 Million||754 Million|
|Technology||65 nm||40 nm||55 nm|
|Features||PureVideo technology (H.264, VC-1, MPEG2, WMV9 decoding acceleration), HDCP-capable, PowerMizer 7.0 energy administration (dynamic switching between performance and energy saving), HDR (High Dynamic-Range Lighting), designed for Windows Vista, supports Dual-Link DVI-D exits for TFT resolutions up to 2560x1600, LVDS, VGA, HDTV, HDCP, HDMI, PCI-E 16x, OpenGL 2.1, Gigathread technology||DirectX Compute Support (Windows 7), CUDA, OpenCL, OpenGL 2.1, certified drivers||OpenGL 2.1, CUDA, PowerMizer 8.0|
|MXM Factor III|