NVIDIA Quadro FX 1500M vs NVIDIA Quadro FX 2800M vs NVIDIA Quadro FX 3500M
NVIDIA Quadro FX 1500M► remove
NVIDIA Quadro FX 1500M is the version of 7900 GS video card for notebooks, which is optimized for CAD and professional 3D-applications. Technically, it has the same or similar chip (G71 architecture), but with other Bios and support for professional drivers.
The gaming performance is clearly worse than the 7900 GS (because of the application optimizing). Nonetheless, the most modded drivers can be used, so the Quadro FX 1500M is more a 7900 GS (for the operating system).
NVIDIA Quadro FX 2800M► remove
The NVIDIA Quadro FX 2800M is a mobile workstation graphics card for high-end laptops. It is based on the Geforce 9800M GT / G92 core but features a higher clock rate and is produced in a 55nm fabrication process versus 65nm of the 9800M GT.
The Quadro FX series of cards are optimized for professional applications like CAD or DCC. OpenGL performance especially should be noticeably better compared to consumer GeForce cards.
The Quadro FX2800M is found in mobile workstations like the Dell M6500 and supports DirectX 10.0 and OpenGL 2.1. In the Dell laptops, the card is able to output up to two displays simultaneously (DisplayPort up to 2560x1600, DVI/HDMI up to 1920x1200). Dell claims a thermal power draw of 65 Watts while Nvidia rates the GPU at 75 Watt TDP.
Due to the relatively high power consumption of 65 to 75 Watts (TDP) and a 10 Watt idle mode, the Quadro FX 2800M is normally only foud in medium to large laptops with powerful cooling solutions.
NVIDIA Quadro FX 3500M► remove
The NVIDIA Quadro FX 3500M was the top professional graphic solution for the mobile use in 2007. The Quadro FX 3500M is especially suitable for CAD, digital image-, video editing and scientifical visualizations (according NVIDIA). It is based upon the NVIDIA GeForce Go 7950GTX. Therefore also a good gaming performance can be expected (for 2007 and if modded drivers are used). The card is shipped with certified drivers for professional applications, which are not optimized for games (inofficially the manual installation of Forceware drivers should be possible).
The drivers of the Quadro FX series are certified for CAD applications (e.g. AutoCad, Inventor, Solidstation, Solud Edge, ...) and DCC applictions (e.g. Maya, 3DS Max, Lightwave 3D, ...) and offers a 12-Bit precision for Subpixel, full image Antialiasing, hardware accelerated Antialiasing for dots and lines and additional optimized settings, which are optimized for CAD and DCC.
Nvidia describes the 3000 series as a power package for big laptops and data structures.
|NVIDIA Quadro FX 1500M||NVIDIA Quadro FX 2800M||NVIDIA Quadro FX 3500M|
|Quadro FX Series|
|20 / 7||96 -||24 / 8|
|Core||375 MHz||600 MHz||575 MHz|
|Memory||500 MHz||1000 MHz||700 MHz|
|Bus||256 Bit||256 Bit||256 Bit|
|Max. Memory||512 MB||1024 MB||512 MB|
|DirectX||DirectX 9c, 3.0||DirectX 10, 4.0||DirectX 9c, 3.0|
|Transistors||278 Million||754 Million||278 Million|
|Technology||90 nm||55 nm||90 nm|
|Features||90nm||OpenGL 2.1, CUDA, PowerMizer 8.0||12-bit-sub-pixel, 32-bit-floating-point precision, 32-bit floating point precision, 128 bit graphic pipeline, hardware 3D window clipping, high precision dynamic-range (DPDR) technology, unified memory architecture, nView multi-display (for multi-monitor support), PowerMizer options for energy saving, architecture which is optimized for workstations, rotated-grid full-scene antialiasing (RG FSAA), unified driver architecture, NVIDIA PureVideo technology|
P Result 1280x1024 + NVIDIA Quadro FX 2800M