Intel HD Graphics (Braswell) vs Intel HD Graphics (Sandy Bridge) vs Intel HD Graphics 5300

Intel HD Graphics (Braswell)

The Intel HD Graphics (Braswell)  is an integrated graphics card in the low end SoCs of the Braswell series (e.g. Pentium N3700). It is based on the same architecture as the integrated GPU of the Broadwell graphics cards (e.g. HD Graphics 5300), but offers less shader cores and slower clock speeds.

The performance depends on the processor. The fastest models offer 16 EUs (shader cores) at 400 - 700 MHz. It should be about twice as fast as the old HD Graphics in Bay Trail SoCs. At the time of announcement in Q1 2015 the following models exist:

• Pentium N3700: 16 EUs @ 400 - 700 MHz, Dual-Channel Memory
• Celeron N3150: 12 EUs @ 320 - 640 MHz, Dual-Channel Memory
• Celeron N3050: 12 EUs @ 320 - 600 MHz, Dual-Channel Memory
• Celeron N3000: 12 EUs @ 320 - 600 MHz, Dual-Channel Memory

In the first CPUs the graphics card was only called Intel HD Graphics. Later (e.g. in the Celeron N3060) Intel renamed it to Intel HD Graphics 400 (Celeron with 12 EUs) and Intel HD Graphics 405 (Pentium with 16 EUs).

Gaming performance ist still only suited for older or less demanding games. Often also the processor is limited gaming performance (e.g. in the dual-core N3000).

The SoC also integrates a video decoding engine that should be able to handle 4K H.265 videos.

Intel HD Graphics (Sandy Bridge)

The Intel HD Graphics (Family) is a processor graphics card which is integrated in the cheap Celeron and Pentium model of the Sandy Bridge generation. It is similar to the Intel HD Graphics 2000 and not with the processor graphics of the older Arrandale dual-core processors (which bears the same name). 

Depending on the processor, the HD graphics offers a different base and Turbo Boost clock speed. Currently there are three different models:

• Power Saving e.g. Celeron 847: base 350MHz, Turbo 800MHz
• Celeron e.g. Celeron B810: base 650MHz, Turbo 950MHz
• Pentium e.g. Pentium B950: base 650MHz, Turbo 1100MHz

Furthermore, the slow CPU performance of some models may influence the games a lot. For example, although the GPU in the Celeron B710 differs not much from the Pentium B950, the gaming performance was clearly worse and many games were unplayable.

As the Intel HD Graphics 3000 and 2000, the processor graphics card is able to use part of the last level cache of the processor (2MB usually for the entry level CPUs). This could be seen as a small amount of very fast dedicated memory.

Altought 2x Antialiasing (AA) is supported, the chip is as fast as when rendering 4x AA. In the Unigine Valley benchmark a similar HD 3000 i7-2637M for example reached the same score with 2x AA and 4x AA.

The feature set compared to the HD Graphics 3000 is also reduced in these entry level CPUs. E.g. Intel Quick Sync (for de- and encoding of HD videos), In Tru 3D, Clear Video HD are usually deactivated.

Intel HD Graphics 5300

The Intel HD Graphics 5300 (GT2) is an integrated Broadwell graphics card revealed in late 2014. It can be found in Core M ULV SoCs such as the Core M-5Y70. While the GPU shines with its extremely low power consumption, raw performance is quite low and barely sufficient for modern games.

Architecture and Features

Broadwell features a GPU based on the Intel Gen8 architecture, which has been optimized in various aspects compared to the previous Gen7.5 (Haswell). Inter alia, the shader arrays called "subslice" have been reorganized and now offer 8 Execution Units (EUs) each. Three subslices form a "slice" for a total of 24 EUs. Combined with other improvements such as larger L1 caches and an optimized frontend, the integrated GPU has become faster and more efficient than its predecessor.

The HD Graphics 5300 represents the mid-range version of the Broadwell GPU family and consists of one slice with 24 EUs. Beyond that, there is also a low-end variant (GT1, 12 EUs) as well as higher-end models (GT3/GT3e + eDRAM, 48 EUs).

All Broadwell GPUs support OpenCL 2.0 and DirectX 11.2. The video engine can now decode H.265 using both fixed function hardware as well as available GPU shaders. Up to three displays can be connected via DP 1.2/eDP 1.3 (max. 3840 x 2160 @ 60 Hz) or HDMI 1.4a (max. 3840 x 2160 @ 24 Hz). HDMI 2.0, however, is not supported.

Performance

Depending on the specific CPU, the maximum GPU frequency varies between 800 and 900 MHz. Due to the very low TDP, however, the average clock in 3D applications will be significantly lower. Therefore, the HD 5300 just barely outperforms the old HD 4000 or HD 4200, but requires much less energy for the same performance.

Only a few games as of 2014/2015 will run fluently at low settings, e.g. Dota 2 or Sims 4.

Power Consumption

Thanks to a new 14 nm process, the entire Core M chip is specified at just 4.5 W TDP and is suited for passively cooled tablets. The TDP is flexible and can be reduced or increased, which has a significant impact on performance.