Intel HD Graphics 405 (Braswell) vs Intel HD Graphics 5300 vs Intel HD Graphics 2500

Intel HD Graphics 405 (Braswell)

The Intel HD Graphics 405 (Braswell)  is an integrated graphics card in the low end SoCs of the Braswell series (e.g. Pentium N3710). It is based on the same architecture as the integrated GPU of the Broadwell graphics cards (e.g. HD Graphics 5300), but offers less shader cores and slower clock speeds.

The GPU was simply called Intel HD Graphics (Broadwell) before 2016 and included also the slower 12 EUs version in the Celeron model. The Graphics 405 name currently only stands for 16-core-versions in Pentium models. The 12 EU version is now called Intel HD Graphics 400.

The clock speed and memory configuration can still vary from model to model.

Gaming performance ist still only suited for older or less demanding games. Often also the processor is limited gaming performance (e.g. in the dual-core N3000).

The SoC also integrates a video decoding engine that should be able to handle 4K H.265 videos.

Intel HD Graphics 5300

The Intel HD Graphics 5300 (GT2) is an integrated Broadwell graphics card revealed in late 2014. It can be found in Core M ULV SoCs such as the Core M-5Y70. While the GPU shines with its extremely low power consumption, raw performance is quite low and barely sufficient for modern games.

Architecture and Features

Broadwell features a GPU based on the Intel Gen8 architecture, which has been optimized in various aspects compared to the previous Gen7.5 (Haswell). Inter alia, the shader arrays called "subslice" have been reorganized and now offer 8 Execution Units (EUs) each. Three subslices form a "slice" for a total of 24 EUs. Combined with other improvements such as larger L1 caches and an optimized frontend, the integrated GPU has become faster and more efficient than its predecessor.

The HD Graphics 5300 represents the mid-range version of the Broadwell GPU family and consists of one slice with 24 EUs. Beyond that, there is also a low-end variant (GT1, 12 EUs) as well as higher-end models (GT3/GT3e + eDRAM, 48 EUs).

All Broadwell GPUs support OpenCL 2.0 and DirectX 11.2. The video engine can now decode H.265 using both fixed function hardware as well as available GPU shaders. Up to three displays can be connected via DP 1.2/eDP 1.3 (max. 3840 x 2160 @ 60 Hz) or HDMI 1.4a (max. 3840 x 2160 @ 24 Hz). HDMI 2.0, however, is not supported.

Performance

Depending on the specific CPU, the maximum GPU frequency varies between 800 and 900 MHz. Due to the very low TDP, however, the average clock in 3D applications will be significantly lower. Therefore, the HD 5300 just barely outperforms the old HD 4000 or HD 4200, but requires much less energy for the same performance.

Only a few games as of 2014/2015 will run fluently at low settings, e.g. Dota 2 or Sims 4.

Power Consumption

Thanks to a new 14 nm process, the entire Core M chip is specified at just 4.5 W TDP and is suited for passively cooled tablets. The TDP is flexible and can be reduced or increased, which has a significant impact on performance.

Intel HD Graphics 2500

The Intel HD Graphics 2500 (or Ivy Bridge GT1) is an integrated graphics card in the Ivy Bridge codenamed desktop processors. It is the successor the the Intel HD Graphics 2000 in the Sandy Bridge CPUs and performs between the old HD 2000 and 3000 GPU (see benchmarks below). Usually it is used in the cheaper desktop Ivy bridge CPUs. The mobile version is simply called Intel HD Graphics and integrated in the Pentium and Celeron line.

Compared to the faster HD Graphics 4000, the 2500 one features less Execution Units (6 versus 16) and only one texture sampler. Therefore, the performance is clearly worse and only suited for low demanding gaming. Intel states a 10 to 15% higher performance compared to the old Sandy Bridge based HD Graphics 2000. Therefore, only older casual games with low requirements are playable with the HD 2500.

A speciality of the Ivy Bridge GPUs is that 4x MSAA is supported in hardware now. However, 2x is only supported through software.  The algorithm to support 2x is going through the 4x pipeline with a software algorithm, so performance is similar to 4x MSAA.

The integrated video decoder called Multi Format Codec Engine (MFX) was also improved and should allow even simultaneus 4K video decoding. DXVAChecker lists MPEG2, VC1, WMV9, and H264 as supported codecs. QuickSync for fast transcoding of videos was also optimized for higher performance and better image quality.

Another new feature is the support for up to 3 independent displays as AMD offers with theirs Eyefinity support (up to 6 displays).

Due to the 22nm 3D Tri-Gate production process, the power consumption is relatively low (the development was focused on performance per Watt).