NVIDIA GeForce GTX 675M vs NVIDIA GeForce GTX 675M SLI vs NVIDIA GeForce GTX 670MX SLI

NVIDIA GeForce GTX 675M

The NVIDIA GeForce GTX 675M is a the fastest single-GPU laptop graphics card as of March 2012. It is based on the GF114 Fermi core and is essentially a renamed version of th GeForce GTX 580M but with higher core clock rates. Therefore, it is still manufactured in 40nm at TSMC.

GF114 architecture

The GF114 core is a power-optimized version of the GF104 used in the GTX 470M, but with no major architectural changes. Therefore, the performance per MHz of the GF114 stays the same even though Nvidia was able to clock the shaders higher while still remaining in the same power scale. The GTX 675M offers 384 cores at a clock speed of 620 MHz. More informations on the similar GF104 architecture can be found on the GeForce GTX 485M page.

Performance

Due to similar clock speeds, the GeForce GTX 675M is as fast as the old GTX 580M and is this noticeably more powerful than the GTX 670M and AMD Radeon HD 6970M. Current games as of 2011 should therefore run fluently in Full HD resolution and maximum details. Only a few very demanding games, such as Metro 2033, may need slightly reduced graphical settings for smoother gameplay.

Features

Similar to the older GF104 chip, the GF114 supports Blu-Ray Bitstream HD Audio output via HDMI. This means the GPU can transfer, for example, Dolby True HD or DTS-HD bitstream without quality loss to a HiFi receiver.

The GTX 670M offers PureVideo HD technology for video decoding. The included Video Processor 4 (VP4) supports feature set C and is able to fully decode MPEG-1, MPEG-2, MPEG-4 Part 2 (MPEG-4 ASP - e.g., DivX or Xvid), VC-1/WMV9, and H.264 (VLD, IDCT, Motion Compensation, and Deblocking). 

Furthermore, the GPU is able to decode two 1080p streams simultaneously (e.g., Blu-Ray Picture-in-Picture).

Through CUDA, OpenCL, and DirectCompute 2.1 support, the GeForce GTX 675M can be used for general calculations. For example, the stream processor can encode videos considerably faster than can many modern CPUs. Furthermore, physics calculations can be done by the GPU using PhysX if supported (e.g., in Mafia 2 or Metro 2033).

3D Vision enables the laptop to send 3D content (3D games, 3D Web Streaming, 3D photos, 3D Blu-Rays) to a built-in 3D-enabled screen or an external 3D TV if supported by the laptop manufacturer.

The power consumption of the GeForce GTX 675M should be the same as of the old GTX 580M, which is rumored to be about 100 Watt (TDP including the MXM board and memory). If not under load, the chip is clocked at 50/100 MHz (chip/shader) and 200/400 MHz in 2D and 3D mode, respectively, for power-saving purposes. Furthermore, the 600M series supports Optimus to automatically switch between the Intel integrated graphics card and the Nvidia GPU. Whether or not a laptop includes this feature is dependent on the manufacturer.

NVIDIA GeForce GTX 675M SLI

The NVIDIA GeForce GTX 675M SLI is a high-end graphics solution for laptops based on the two GTX 675M graphic cards in SLI mode. With SLI, each card usually renders a single frame (AFR mode). Therefore, it may suffer from micro stuttering in low fps ranges of 30fps. This happens because of different timespans between two frames (e.g., irregular delays between sequential frames).

The GeForce GTX 675M SLI supports the same features as a single GTX 675M card. Therefore, it supports DirectX 11 and is produced in a 40nm fabrication process at TSMC. Technically, the GTX 675M (SLI) is completely identical to the GTX 580M (SLI).

GF114 architecture

The GF114 core is a power-optimized version of the GF104 (used in the GTX 485M), but with no architectural changes. Therefore, the performance per MHz stays the same. Nvidia, however, was able to clock the shaders higher while still remaining in the same power envelope. The GTX 675M offers all 384 shader cores in the GF114. More information on the similar GF104 architecture can be found on the GeForce GTX 485M page.

Performance

Due to the higher clock speeds, the GeForce GTX 675M SLI is faster than the GTX 485M SLI an as fast as the GTX 580M SLI. Demanding games like Crysis 2, Witcher 2, Dirt 3 or even Metro 2033 can be played in 1920x1080 with maximum details and most Antialiasing features enabled.

Features

Similar to the older GF104 chip, the GF114 also supports Bitstream HD Audio (Blu-Ray) output via HDMI. That means it can transfer, for example, Dolby True HD or DTS-HD bitstream without quality loss to a HiFi receiver.

The GTX 675M offers the PureVideo HD technology for video decoding. The included Video Processor 4 (VP4) supports feature set C and is therefore able to fully decode MPEG-1, MPEG-2, MPEG-4 Part 2 (MPEG-4 ASP - e.g., DivX or Xvid), VC-1/WMV9, and H.264 (VLD, IDCT, Motion Compensation, and Deblocking). 

Furthermore, the GPU is able to decode two 1080p streams simultaneously (e.g. for Blu-Ray Picture-in-Picture).

Through CUDA, OpenCL, and DirectCompute 2.1 support, the GeForce GTX 675M can be of help in general calculations. For example, the stream processor can encode videos considerably faster than can a fast CPU. Furthermore, physics calculations can be done by the GPU using PhysX (e.g., supported by Mafia 2 or Metro 2033). As two 675M are used for the SLI combination, one card alone can be used for PhysX and the other for rendering the game graphics.

3D Vision enables the laptop to send 3D content (3D games, 3D Web Streaming, 3D photos, 3D Blu-Rays) to a built-in 3D enabled screen or an external 3D TV (only if supported by the laptop manufacturer).

The power consumption of the GeForce GTX 675M is in the same region as the old GTX 580M, which is supposedly about 100 Watt (TDP including the MXM board and memory). Therefore, the SLI system needs up to 200 Watt using both cards. Without load, the performance is clocked at 50/100 MHz (chip/shader) in 2D mode and 200/400 in 3D mode to save power. Furthermore, a single card can be deactivated to save power.

The similar desktop GeForce GTX 580 is based on the GF110 chip and much faster in comparison. Therefore, the 675M is more closely related to the GeForce GTX 560Ti, the latter of which is still faster due to higher clock speeds.

NVIDIA GeForce GTX 670MX SLI

The NVIDIA GeForce GTX 670MX SLI is a high-end DirectX 11-compatible graphics card for laptops, consisting of two GeForce GTX 670MX. Each card has a 28nm GK104 core based on the Kepler architecture. With SLI, each card usually renders a single frame (AFR mode). Therefore, it may suffer from micro stuttering in low fps ranges of 30fps. This happens because of different timespans between two frames (e.g., irregular delays between sequential frames).

Architecture

The Kepler architecture is the successor to the Fermi architecture that first appeared in laptops with the GeForce 400M series. The GK106 Kepler core offers five shader blocks, called SMX, that are clocked at the same speed as the central core. In the GTX 670MX, all 5 blocks are active leading to the 960 CUDA cores. Although more shader cores are available in the Kepler architecture as compared to the Fermi design, the Kepler shaders are still expected to be up to twice as power efficient. However, due to the missing hot clock of the shader domain, two shaders of a Kepler chip are of similar speed to one shader of a Fermi chip (as the latter is clocked twice as fast). PCIe 3.0 is now supported by the mobile Kepler series and an optional Turbo mode can automatically overclock the Nvidia card by a theoretical 15 percent if the laptop cooling system allows it. The implementation of this boost mode is done in the BIOS, but it is ultimately dependent upon the manufacturer of the laptop.

Performance

The graphics performance of the GeForce GTX 670MX SLI depends on the driver support of the benchmark / game. Ideally it can be up to twice as fast as a single GTX 670MX, ranking it as one of the fastest mobile graphics solution for laptops in 2012. The performance should be on average similar to a single GTX 680M, but with the problems of micro stuttering (see above) and a higher power consumption. The GPUs have enough power to run games of 2012 fluently with Full HD resolution, maxed out graphical settings and antialiasing. Even extremely demanding titles like Metro 2033, Alan Wake or Risen 2 are playable at the highest detail settings.

Features

The improved feature set now includes support for up to 4 active displays. Furthermore, high resolution monitors of up to 3840x2160 pixels can now be connected using DisplayPort 1.2 or HDMI 1.4a if available. HD-Audio codecs, such as Dolby TrueHD and DTS-HD, can be transmitted via bitstream mode through the HDMI port. However, as most laptops will feature Optimus, the integrated GPU will likely have direct control over the display ports and may limit the feature set available by the Nvidia Kepler cards.

The 5th generation PureVideo HD video processor (VP5) is also integrated in the GK104 core and offers hardware decoding of HD videos. Common codecs such as MPEG-1/2, MPEG-4 ASP, H.264 and VC1/WMV9 are fully supported up to 4K resolutions while VC1 and MPEG-4 are supported up to 1080p. Two streams can be decoded in parallel for features such as Picture-in-Picture. Another novelty is the inclusion of a dedicated video encoding engine similar to Intel QuickSync that can be accessed by the NVENC API.

Power Consumption

The power consumption of the GeForce GTX 670MX SLI should double compared to a single GTX 670MX. Therefore, only large desktop replacements can handle the heat.