The NVIDIA GeForce GT 620M is an entry-level, DirectX 11 compatible graphics card that was announced in the first quarter of 2012 for laptops. Its core can be based on either the 40nm GF108 chip (similar to the GeForce GT 525M) or the new power-optimized 28nm GF117 chip with 64-bit or 128-bit DDR3 memory. Both architectures still stem directly from the Fermi generation.
It should be noted that the 28nm version of the GT 620M does not offer dedicated graphics ports and can therefore only be used in conjunction with Optimus.
Architecture
The GF117 is based on the optimized GF108 Fermi chip (GeForce GT 540M) and offers 96 shaders, 16 TMUs and 4 ROPs. Each shader core is clocked twice as fast as the rest of the graphics chip, a technique known as hot clocking. More detailed information on Fermi can be found on the GT 435M GPU page.
Performance
The 128-bit version of the GeForce GT 620M (with turbo) performs similarly to the older GeForce GT 540M due to their similar clock rates and core architecture. Therefore, modern and demanding games are playable in low to medium settings at 1366x768 pixel resolution. The rumored 64-bit version will likely suffer from the reduced bandwidth and offer slower performance in comparison.
Features
The shader cores (also called CUDA cores) can be used for general calculations with APIs such as CUDA, DirectCompute 2.1 and OpenCL. PhysX is theoretically possible, but the GT 620M is too slow to handle both PhysX and 3D rendering for modern games. 3D Vision is not supported according to Nvidia.
Nvidia claims that the power consumption of the Geforce GT 620M should be below that of the GeForce GT 525M due to the improved efficiency of the GF117 architecture.
The NVIDIA GeForce GT 645M is a mid-range, DirectX 11.1 compatible graphics card that was announced in the third quarter of 2012 for laptops. It is a faster clocked GeForce GT 640M and therefore also based on the Kepler GK107 architecture manufactured in 28nm at TSMC. The graphics card uses a 128-Bit wide memory interface with either the more common but slower DDR3 for VRAM or the more expensive and faster GDDR5.
Architecture
The Kepler architecture is the successor to the Fermi architecture that first appeared in laptops with the GeForce 400M series. The GK107 Kepler core offers two shader blocks, called SMX, each with 192 shaders for a total of 384 shader cores that are clocked at the same speed as the processor core. Although more shader cores are available in the Kepler architecture as compared to the Fermi design, the Kepler shaders are still expected to be up to twice as power efficient. However, due to the missing hot clock of the shader domain, two shaders of a Kepler chip are as fast as one shader of a Fermi chip (the latter is clocked twice as fast). PCIe 3.0 is now supported by the mobile Kepler series and an optional Turbo mode can automatically overclock the Nvidia card by a theoretical 15 percent if the laptop cooling system allows it. The implementation of this boost mode is done in the BIOS, but it is ultimately dependent upon the manufacturer of the laptop.
Performance
The gaming performance of the GeForce GT 645M equipped with DDR3 graphics memory depends on the 3D clock in the used laptop and is slightly above an average GT 640M. Therefore demanding games like Battlefield 3 are playable in 1366x768 and medium settings. Older and less demanding games, such as Modern Warfare 3, are easily playable with maxed out settings and high resolutions.
Features
The improved feature set now includes support for up to 4 active displays. Furthermore, high resolution monitors of up to 3840x2160 pixels can now be connected using DisplayPort 1.2 or HDMI 1.4a if available. HD-Audio codecs, such as Dolby TrueHD and DTS-HD, can be transmitted via bitstream mode through the HDMI port. However, as most laptops will feature Optimus, the integrated GPU will likely have direct control over the display ports and may limit the feature set available by the Nvidia Kepler cards.
The 5th generation PureVideo HD video processor (VP5) is also integrated in the GK107 core and offers hardware decoding of HD videos. Common codecs such as MPEG-1/2, MPEG-4 ASP, H.264 and VC1/WMV9 are fully supported up to 4K resolutions while VC1 and MPEG-4 are supported up to 1080p. Two streams can be decoded in parallel for features such as Picture-in-Picture. Another novelty is the inclusion of a dedicated video encoding engine similar to Intel QuickSync that can be accessed by the NVENCI API.
The power consumption of the GeForce GT 645M should be similar to the GT 640M and therefore a bit below that of the older GeForce GT 540M and more in line with the GT 525M. As a result, the Nvidia GPU is best suited for multimedia notebooks 14-inches or greater.
The NVIDIA GeForce GT 625M is an entry-level, DirectX 11 compatible graphics card that was announced in the third quarter of 2012 for laptops. Compared to the older GeForce GT 620M, it is a higher clocked version of the chip. The 620M can be based on either the 40nm GF108 chip (similar to the GeForce GT 525M) or the new power-optimized 28nm GF117 chip with 64-bit or 128-bit DDR3 memory. Both architectures still stem directly from the Fermi generation. Therefore, both versions are also possible for the GT 625M.
It should be noted that the 28nm version of the GT 620M does not offer dedicated graphics ports and can therefore only be used in conjunction with Optimus.
Architecture
The GF117 is based on the optimized GF108 Fermi chip (GeForce GT 540M) and offers 96 shaders, 16 TMUs and 4 ROPs. Each shader core is clocked twice as fast as the rest of the graphics chip, a technique known as hot clocking. More detailed information on Fermi can be found on the GT 435M GPU page.
Performance
The performance of the GT 625M depends on the Turbo clock in the used laptop but should be on average a bit above the average GT 620M. Therefore, the card is suited for casual gamers as demanding games of 2012 may only run in low detail settings fluently.
Features
The shader cores (also called CUDA cores) can be used for general calculations with APIs such as CUDA, DirectCompute 2.1 and OpenCL. PhysX is theoretically possible, but the GT 625M is too slow to handle both PhysX and 3D rendering for modern games. 3D Vision is not supported according to Nvidia.
Average Benchmarks NVIDIA GeForce GT 620M → 100%n=2
Average Benchmarks NVIDIA GeForce GT 645M → 193%n=2
Average Benchmarks NVIDIA GeForce GT 625M → 99%n=2
- Range of benchmark values for this graphics card - Average benchmark values for this graphics card * Smaller numbers mean a higher performance 1 This benchmark is not used for the average calculation
Game Benchmarks
The following benchmarks stem from our benchmarks of review laptops. The performance depends on the used graphics memory, clock rate, processor, system settings, drivers, and operating systems. So the results don't have to be representative for all laptops with this GPU. For detailed information on the benchmark results, click on the fps number.
Deutsch
Español
Français
Italiano
Nederlands
Polski
Português
Русский
Türkçe
Svenska
Chinese
Magyar
- Average benchmark values for this graphics card
