Qualcomm Snapdragon 400 APQ8028 vs Qualcomm Snapdragon S4 Plus MSM8227 vs Qualcomm Snapdragon S4 Pro APQ8064A

Qualcomm Snapdragon 400 APQ8028

The Qualcomm Snapdragon 400 APQ8028 is an entry-level ARM-SoC for Android smartphones and tablets. It offers four Cortex-A7 cores clocked at up to 1.6 GHz (Quad-Core) as well as an Adreno 305 graphics card at 450 MHz. The chip is manufactured in 28 nm LP at TSMC.

Qualcomm Snapdragon S4 Plus MSM8227

The Qualcomm Snapdragon S4 MSM8277 is a mid-range SoC for smartphones and tablets (mostly Android based). It contains two Krait (improved ARM Cortex-A9) CPU cores at 1.0 GHz and a Adreno 305 graphics card. A memory controller and radio elements (excluding LTE) are also included. The chip is produced in 28nm LP process at TSMC.

Qualcomm Snapdragon S4 Pro APQ8064A

The Qualcomm Snapdragon S4 Pro APQ8064A is a high-end SoC for Android smartphones and tablets, which was introduced in 2012. The chip integrates 4 CPU cores, which are based on the ARMv7-compatible, but by Qualcomm designed Krait architecture. This provides a much higher per-MHz performance than Cortex-A9 chips such as Nvidia's Tegra 3 or the Exynos 4412 from Samsung, but does not quite reach the performance of the Cortex-A15 (for example in the Tegra 4). The memory is accessed via 2 x 32 bit LPDDR2 at up to 533 MHz, which offers a bandwidth of 8.5 GB/s.

Thanks to a dedicated decoder, the SoC can accelerate 1080p video playback up to a frame rate of 30 fps. 3D photos are possible up to a resolution of 20 megapixels. In addition, the chip also integrates a wireless module with Bluetooth 4.0 and WLAN 802.11ac/a/b/g/n. Produced by TSMC in 28 nm (LP), the power consumption should be around 4 watts (estimated, depending on the clock speed).